Toshiba RD-XS52SC, RD-XS52SU, RD-KX50SU For playback only Disc Mark Specification Remarks

Page 13

For playback only

Disc

Mark

Specification

Remarks

Introduction

DVD video

• 12cm (43/4 in.) / 8cm (31/4 in.)

disc

• Region number 1 or ALL

 

• Color system: NTSC

The region number of this DVD recorder is 1. If region numbers, corresponding to a specific playable area, are printed on your DVD video disc and you do not find 1 or ALL , or the disc is encoded to permit playback only in regions other than Region 1, disc playback will not be allowed by the recorder.

Connections

VIDEO CD

 

• 12cm (43/4

in.) / 8cm (31/4

in.)

 

 

• Color system: NTSC

 

 

DIGITAL VIDEO

• Version 1.1 and 2.0

 

 

 

 

 

 

 

 

 

 

Audio CD

 

• 12cm (43/4

in.) / 8cm (31/4

in.)

CD-R

•

12cm (43/4 in.)

Depending on the disc status, playback may

 

•

CD-DA (audio CD) format

not be possible.

CD-RW

•You cannot play discs other than those listed above.

•You cannot play non-standardized discs even if they may be labeled as above.

•You cannot play discs with specialized encoding (such as SACD discs) or the DVD audio portions of DVD Audio discs.

•This recorder uses the NTSC color system, and cannot play DVD video discs recorded in any other color system

(PAL, SECAM, etc.), even if they have region marks 1 or ALL .

•Toshiba cannot guarantee that all discs bearing the DVD or CD logos will operate as expected. Please see the discussion of compatibility on page 11.

•Toshiba is not liable for any damage or loss caused directly or indirectly by the malfunction of this recorder, including, without limitation, any one of the following:

•Failure to record contents intended to be recorded by the consumer.

•Failure to edit contents as intended by the consumer.

•When a DVD-RAM disc or a DVD-R disc created on this recorder is used (e.g., insertion, playback, recording or editing) in another DVD player, recorder or personal computer drive.

•When a DVD-RAM disc or a DVD-R disc that is used in the manner described in the immediately preceding bullet point is used again in this recorder.

•When a DVD-RAM disc or a DVD-R disc that was recorded in another DVD recorder, or in a personal computer drive is used in this recorder.

•Some functions such as Library may not work with personal computer discs.

•Discs recorded in this recorder may not operate as expected on other DVD players, recorders or personal computer drives.

Basic Setup

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents RD-XS52SU RD-XS52SC RD-KX50SU This HDD/DVD video recorder employs a Laser System See service procedureMay result in hazardous radiation exposure Location of the required label Important Safety Instructions Additional Safety Instructions When not in use PrecautionsIntroduction Exemptions Power OutageDo not use the unit when moisture condensation may occur Introduction PrecautionsWait Moisture condensation occurs during the following casesConnections Accessories Remote control Batteries AAA x Installation procedure Video/Audio cable IR control cable Registration cardAbout this product For recording / playback Disc Mark Specification Remarks Using different disc types for different purposesChoosing a disc DVD-RAM discs for your personal libraryDisc For playback only Disc Mark Specification RemarksOn DVD-RAM discs To protect recorded contentsIntroduction Choosing a disc DVD-RAM discs with cartridges are recommended for recordingMarks on DVD video discs On DVD-R discsOn cleaning discs Structure of disc contentsOn handling discs On storing discsTable of Contents Operating with the remote control Preparation of the remote controlOpen the cover Insert batteries AAA size Close the coverWhen you connect a TV equipped with audio/ video inputs Connection procedureWhen you connect an audio system Connections Connecting an antenna and TVConnect to a TV equiped with audio/video inputs Connect the power cord of the recorder to a wall outletThis set-up will allow you to Connecting to cable TV signalYou will need to Component Output When the satellite system has audio/video outputs Connecting to a satellite systemSignal sensor of the set top box Connecting the IR control cableTransmitter About Hdmitm Connecting to a TV with the Hdmi terminalAudio setting for the Hdmi connection Component video outputs/inputs Connecting to aTV equipped with component video inputsDigital audio input Connecting to an audio systemPage Basic Setup Turning the power on Basic SetupON/STANDBY button ON/STANDBY indicator Turning the power offStartup/finishing closing icons Press Setup Initial settingsIf a message appears Tip on settingExample of the icon FunctionBasic Setup Initial settings Language settingPress / to select a language, then press Auto clock setting Time and date settingPress / to select Auto or Manual, then press Enter AutoAuto Press EnterUse No UsePress / and Adjust / to set the clock Manual clock settingAfter setting all the items, press Enter Press / to select Yes, then press EnterPress / to select Channel setting, then press Enter Channel settingPress / to select TV or Cable, then press Enter Press / to select Auto, then press Channel referenceAdding or erasing channels Preparation Set top box settingPress Press , then press Adjust or / to select Off or OnOff 10Press Setup RCA Set top box brand codeSample of a Guide channel chart from a local TV listing Guide channel settingGuide channel number 33 HBO Press Setup to display the setup menu Output sound settingPress / to select Picture/Audio settings, then press Enter Press / to select Audio out select, then press EnterPress / to select the output sound format Once the proper setting is selected, pressBitstream Analog 2chPress / to select Display settings, then press Enter TV shape settingPress / to select TV shape, then press Press / to select the picture shape When the proper setting is selected, pressOperating a TV with the remote control of this recorder Remote control settingsOperating your TV with the remote control Release TV CodeJVC Brand code tablePress / to select Operational settings, then press Enter Setting up the recorder Press SetupPress / to select IR code, then press Press / to select DR 2 example, then press EnterDisabling the remote control for a temporary period Limited One 1 Year Warranty on Parts Limited Ninety 90 Day Warranty on LaborRental Units Commercial UnitsHow to Obtain Warranty Services Canadian Warranty Information Garantie Canadienne Memo Printed on 70% Recycled Paper
Top Page Image Contents