Toshiba RD-XS52SU, RD-XS52SC, RD-KX50SU owner manual Connecting to a satellite system

Page 24

Connections

Connecting to a satellite system

Choose one of the following according to your type of satellite receiver.

HDMI OUTPUT
VIDEO	S-VIDEO
	INPUT1
	INPUT3	CHANNEL
		CHANNEL
VIDEO	S-VIDEO	CHANGE
VIDEO	S-VIDEO	IR

RF IN

FROM ANT.)

RF OUT (TO TV)

VHF / UHF

Satellite receiver

3CH

4CH

OUT IN

Satellite antenna

When the satellite receiver does not have audio/ video outputs

1Connect a satellite antenna to the satellite receiver.

2Connect the RF IN (FROM ANT.) terminal on the recorder and the RF OUT terminal of the satellite receiver.

3Connect the RF OUT (TO TV) terminal on the recorder and the antenna input connector of the TV.

You will need to:

•set “Cable Box/DBS” of “Set Top Box setting” to

“C.Box”. page 42

•set “Select Input” of “Set Top Box setting”to “3CH” or

“4CH”. page 42

You can control satellite channels from the recorder. Perform the below.

1)Connect the supplied IR cable to the CHANNEL

CHANGE IR jack of the recorder. page 25

2)Set “IR control” of “Set Top Box setting” to “On”.

page 42

Satellite antenna					Satellite
					Satellite
					receiver
			Audio outputs			Video output
					HDMI OUTPUT
DIGITAL AUDIO	Y	PB	PR			S-VIDEO
OUTPUT	Y	PB	PR			S-VIDEO
OUTPUT
BITSTREAM/PCM			COMPONENT OUTPUT			INPUT1
			OUTPUT			INPUT3	C
							C
OPTICAL			S-VIDEO	R	L VIDEO	S-VIDEO	C
OPTICAL			S-VIDEO	R	L VIDEO	S-VIDEO	IR

When the satellite system has audio/video outputs

1Connect a satellite antenna to the satellite system.

2Connect the INPUT1 or INPUT3 (VIDEO/L/R) jacks on the recorder and the audio/video output jacks of the satellite system.

3Connect the OUTPUT (VIDEO/L/R) jacks on the recorder and the audio/video input jacks of the TV.

4Connect the RF OUT (TO TV) terminal on the recorder and the antenna input connector of the TV.

You will need to:

•set “Cable Box/DBS” of “Set Top Box setting” to

“C.Box”. page 42

•set “Select Input” of “Set Top Box setting” to “Line1”.

page 42

You can control satellite channels from the recorder. Perform the below.

1)Connect the supplied IR cable to the CHANNEL

CHANGE IR jack of the recorder. page 25

2)Set “IR control” of “Set Top Box setting” to “On”.

page 42

24

Image 24

Contents RD-XS52SU RD-XS52SC RD-KX50SU See service procedure This HDD/DVD video recorder employs a Laser SystemMay result in hazardous radiation exposure Location of the required label Important Safety Instructions Additional Safety Instructions Precautions When not in useIntroduction Power Outage ExemptionsIntroduction Precautions Do not use the unit when moisture condensation may occurWait Moisture condensation occurs during the following casesConnections Installation procedure Accessories Remote control Batteries AAA xVideo/Audio cable IR control cable Registration cardAbout this product Using different disc types for different purposes For recording / playback Disc Mark Specification RemarksChoosing a disc DVD-RAM discs for your personal libraryFor playback only Disc Mark Specification Remarks DiscTo protect recorded contents On DVD-RAM discsIntroduction Choosing a disc DVD-RAM discs with cartridges are recommended for recordingOn DVD-R discs Marks on DVD video discsStructure of disc contents On cleaning discsOn handling discs On storing discsTable of Contents Preparation of the remote control Operating with the remote controlOpen the cover Insert batteries AAA size Close the coverConnection procedure When you connect a TV equipped with audio/ video inputsWhen you connect an audio system Connecting an antenna and TV ConnectionsConnect the power cord of the recorder to a wall outlet Connect to a TV equiped with audio/video inputsConnecting to cable TV signal This set-up will allow you toYou will need to Component Output Connecting to a satellite system When the satellite system has audio/video outputsConnecting the IR control cable Signal sensor of the set top boxTransmitter Connecting to a TV with the Hdmi terminal About HdmitmAudio setting for the Hdmi connection Connecting to aTV equipped with component video inputs Component video outputs/inputsConnecting to an audio system Digital audio inputPage Basic Setup Basic Setup Turning the power onON/STANDBY button ON/STANDBY indicator Turning the power offStartup/finishing closing icons Initial settings Press SetupTip on setting If a message appearsExample of the icon FunctionLanguage setting Basic Setup Initial settingsPress / to select a language, then press Time and date setting Auto clock settingPress / to select Auto or Manual, then press Enter AutoPress Enter AutoUse No UseManual clock setting Press / and Adjust / to set the clockAfter setting all the items, press Enter Press / to select Yes, then press EnterChannel setting Press / to select Channel setting, then press EnterPress / to select TV or Cable, then press Enter Channel reference Press / to select Auto, then pressAdding or erasing channels Set top box setting PreparationPress , then press Adjust or / to select Off or On PressOff 10Press Setup Set top box brand code RCAGuide channel setting Sample of a Guide channel chart from a local TV listingGuide channel number 33 HBO Output sound setting Press Setup to display the setup menuPress / to select Picture/Audio settings, then press Enter Press / to select Audio out select, then press EnterOnce the proper setting is selected, press Press / to select the output sound formatBitstream Analog 2chTV shape setting Press / to select Display settings, then press EnterPress / to select TV shape, then press When the proper setting is selected, press Press / to select the picture shapeRemote control settings Operating a TV with the remote control of this recorderOperating your TV with the remote control Release TV CodeBrand code table JVCSetting up the recorder Press Setup Press / to select Operational settings, then press EnterPress / to select IR code, then press Press / to select DR 2 example, then press EnterDisabling the remote control for a temporary period Limited Ninety 90 Day Warranty on Labor Limited One 1 Year Warranty on PartsRental Units Commercial UnitsHow to Obtain Warranty Services Canadian Warranty Information Garantie Canadienne Memo Printed on 70% Recycled Paper