Toshiba RD-KX50SU, RD-XS52SU, RD-XS52SC owner manual Connecting an antenna and TV, Connections

Page 20

Connections

Connecting an antenna and TV

Connect your TV and the antenna to this recorder for recording and to view broadcast signals on the TV.

1 Disconnect the antenna cable from your TV, and connect it to the RF IN (FROM ANT.) terminal on the recorder.

2 Using the supplied coaxial cable of this recorder, connect the RF OUT (TO TV) terminal to the TV.

VHF/UHF antenna

Antenna cable (not supplied)

To RF IN (FROM ANT.)1

TV

			HDMI OUTPUT			RF IN
			HDMI OUTPUT			(FROM ANT.)
						(FROM ANT.)
	R	L	VIDEO	S-VIDEO
				INPUT1		RF OUT
						RF OUT
						TO TV)
				INPUT3		CHANNEL
						CHANNEL
	R	L	VIDEO	S-VIDEO	IR	CHANGE
	R	L	VIDEO	S-VIDEO		VHF / UHF
						VHF / UHF

To RF OUT (TO TV) 2

Coaxial cable (supplied)

e.g.

2 To antenna input

Antenna splitter

(not supplied)

		Types of an antenna terminal
	VHF/UHF	may vary depending on the TV.
	VHF/UHF	Check the type on your TV, and
		Check the type on your TV, and
		connect properly using either
		method as shown.

For connecting to a cable box or a satellite system, see page 22 to 25.

Note

•This connection insures accessibility of broadcast signals to your TV only. Unlike a VCR, you can not assign channel 3 or 4 for playback of this recorder, because an antenna input only passes through in the recorder. You must connect this recorder to a video input of your TV to enjoy playback picture from this recorder. (See the next page.)

20

Image 20

Contents RD-XS52SU RD-XS52SC RD-KX50SU May result in hazardous radiation exposure See service procedureThis HDD/DVD video recorder employs a Laser System Location of the required label Important Safety Instructions Additional Safety Instructions Introduction PrecautionsWhen not in use Power Outage ExemptionsIntroduction Precautions Do not use the unit when moisture condensation may occurWait Moisture condensation occurs during the following casesConnections Installation procedure Accessories Remote control Batteries AAA xVideo/Audio cable IR control cable Registration cardAbout this product Using different disc types for different purposes For recording / playback Disc Mark Specification RemarksChoosing a disc DVD-RAM discs for your personal libraryFor playback only Disc Mark Specification Remarks DiscTo protect recorded contents On DVD-RAM discsIntroduction Choosing a disc DVD-RAM discs with cartridges are recommended for recordingOn DVD-R discs Marks on DVD video discsStructure of disc contents On cleaning discsOn handling discs On storing discsTable of Contents Preparation of the remote control Operating with the remote controlOpen the cover Insert batteries AAA size Close the coverWhen you connect an audio system Connection procedureWhen you connect a TV equipped with audio/ video inputs Connecting an antenna and TV ConnectionsConnect the power cord of the recorder to a wall outlet Connect to a TV equiped with audio/video inputsYou will need to Connecting to cable TV signalThis set-up will allow you to Component Output Connecting to a satellite system When the satellite system has audio/video outputsTransmitter Connecting the IR control cableSignal sensor of the set top box Connecting to a TV with the Hdmi terminal About HdmitmAudio setting for the Hdmi connection Connecting to aTV equipped with component video inputs Component video outputs/inputsConnecting to an audio system Digital audio inputPage Basic Setup Basic Setup Turning the power onON/STANDBY button ON/STANDBY indicator Turning the power offStartup/finishing closing icons Initial settings Press SetupTip on setting If a message appearsExample of the icon FunctionPress / to select a language, then press Language settingBasic Setup Initial settings Time and date setting Auto clock settingPress / to select Auto or Manual, then press Enter AutoPress Enter AutoUse No UseManual clock setting Press / and Adjust / to set the clockAfter setting all the items, press Enter Press / to select Yes, then press EnterPress / to select TV or Cable, then press Enter Channel settingPress / to select Channel setting, then press Enter Adding or erasing channels Channel referencePress / to select Auto, then press Set top box setting PreparationOff Press , then press Adjust or / to select Off or OnPress 10Press Setup Set top box brand code RCAGuide channel setting Sample of a Guide channel chart from a local TV listingGuide channel number 33 HBO Output sound setting Press Setup to display the setup menuPress / to select Picture/Audio settings, then press Enter Press / to select Audio out select, then press EnterOnce the proper setting is selected, press Press / to select the output sound formatBitstream Analog 2chPress / to select TV shape, then press TV shape settingPress / to select Display settings, then press Enter When the proper setting is selected, press Press / to select the picture shapeRemote control settings Operating a TV with the remote control of this recorderOperating your TV with the remote control Release TV CodeBrand code table JVCSetting up the recorder Press Setup Press / to select Operational settings, then press EnterPress / to select IR code, then press Press / to select DR 2 example, then press EnterDisabling the remote control for a temporary period Limited Ninety 90 Day Warranty on Labor Limited One 1 Year Warranty on PartsRental Units Commercial UnitsHow to Obtain Warranty Services Canadian Warranty Information Garantie Canadienne Memo Printed on 70% Recycled Paper