Toshiba RD-XS52SC, RD-XS52SU Press / to select the output sound format, Bitstream, Analog 2ch

Page 49

4 Press / to select the output sound format.

Bitstream:

Select when connected to an amplifier equipped with a

ENTER Dolby Digital, DTS, MPEG1 and MPEG2 decoder. ( page 29)

OPTICAL

Amplifier

The recorder outputs digital audio information in the bitstream format when you play a DVD video disc recorded on the Dolby Digital, DTS, MPEG1 and MPEG2 recording system.

Analog 2ch:

Select when connected to a TV or audio system via the analog audio jacks. ( pages 21, 28)

AUDIO

INPUTTV

L R

PCM:

Select when connected to a 2 channel digital stereo system. ( page 29)

OPTICAL

Amplifier

The recorder outputs sounds in the PCM 2ch format when you play a disc recorded on the Dolby Digital, MPEG1 and MPEG2 recording system.

5 Once the proper setting is selected, press

ENTER.

The submenu disappears.

To exit the setting menu, press SETUP button.

ENTER

“B: Output sound setting” is complete. Go to “C: TV shape setting”. ( page 50)

Introduction

Connections

Basic Setup

49

Image 49

Contents RD-XS52SU RD-XS52SC RD-KX50SU This HDD/DVD video recorder employs a Laser System See service procedureMay result in hazardous radiation exposure Location of the required label Important Safety Instructions Additional Safety Instructions When not in use PrecautionsIntroduction Exemptions Power OutageDo not use the unit when moisture condensation may occur Introduction PrecautionsWait Moisture condensation occurs during the following casesConnections Accessories Remote control Batteries AAA x Installation procedureVideo/Audio cable IR control cable Registration cardAbout this product For recording / playback Disc Mark Specification Remarks Using different disc types for different purposesChoosing a disc DVD-RAM discs for your personal libraryDisc For playback only Disc Mark Specification RemarksOn DVD-RAM discs To protect recorded contentsIntroduction Choosing a disc DVD-RAM discs with cartridges are recommended for recordingMarks on DVD video discs On DVD-R discsOn cleaning discs Structure of disc contentsOn handling discs On storing discsTable of Contents Operating with the remote control Preparation of the remote controlOpen the cover Insert batteries AAA size Close the coverWhen you connect a TV equipped with audio/ video inputs Connection procedureWhen you connect an audio system Connections Connecting an antenna and TVConnect to a TV equiped with audio/video inputs Connect the power cord of the recorder to a wall outletThis set-up will allow you to Connecting to cable TV signalYou will need to Component Output When the satellite system has audio/video outputs Connecting to a satellite systemSignal sensor of the set top box Connecting the IR control cableTransmitter About Hdmitm Connecting to a TV with the Hdmi terminalAudio setting for the Hdmi connection Component video outputs/inputs Connecting to aTV equipped with component video inputsDigital audio input Connecting to an audio systemPage Basic Setup Turning the power on Basic SetupON/STANDBY button ON/STANDBY indicator Turning the power offStartup/finishing closing icons Press Setup Initial settingsIf a message appears Tip on settingExample of the icon FunctionBasic Setup Initial settings Language settingPress / to select a language, then press Auto clock setting Time and date settingPress / to select Auto or Manual, then press Enter AutoAuto Press EnterUse No UsePress / and Adjust / to set the clock Manual clock settingAfter setting all the items, press Enter Press / to select Yes, then press EnterPress / to select Channel setting, then press Enter Channel settingPress / to select TV or Cable, then press Enter Press / to select Auto, then press Channel referenceAdding or erasing channels Preparation Set top box settingPress Press , then press Adjust or / to select Off or OnOff 10Press Setup RCA Set top box brand codeSample of a Guide channel chart from a local TV listing Guide channel settingGuide channel number 33 HBO Press Setup to display the setup menu Output sound settingPress / to select Picture/Audio settings, then press Enter Press / to select Audio out select, then press EnterPress / to select the output sound format Once the proper setting is selected, pressBitstream Analog 2chPress / to select Display settings, then press Enter TV shape settingPress / to select TV shape, then press Press / to select the picture shape When the proper setting is selected, pressOperating a TV with the remote control of this recorder Remote control settingsOperating your TV with the remote control Release TV CodeJVC Brand code tablePress / to select Operational settings, then press Enter Setting up the recorder Press SetupPress / to select IR code, then press Press / to select DR 2 example, then press EnterDisabling the remote control for a temporary period Limited One 1 Year Warranty on Parts Limited Ninety 90 Day Warranty on LaborRental Units Commercial UnitsHow to Obtain Warranty Services Canadian Warranty Information Garantie Canadienne Memo Printed on 70% Recycled Paper