Toshiba RD-XS52SU, RD-XS52SC, RD-KX50SU owner manual Connections

Page 9

Program

Content is not

copyright

protected

Content is not

copyright protected

Recording permitted once

Recording		Copy
			DVD-RAM
Can be	HDD	Can be	disc
	HDD

recorded		copied	DVD-R
	DVD-RAM
	disc		HDD
Can be		Can be	HDD
Can be	DVD-R	Can be
recorded	DVD-R	copied
			DVD-RAM
	HDD		disc
Can be	HDD	Cannot be
Can be		Cannot be
recorded		copied	DVD-R

VCR Plus+, C3 and PlusCode are registered trademarks of Gemstar Development Corporation. The VCR Plus+ system is manufactured under license from Gemstar Development Corporation.

Manufactured under license from QSound Labs, Inc. U.S. patent Nos. 5,105,462, 5,208,860 and 5,440,638 and various foreign counterpart. Copyright QSound Labs, Inc. 1998-2002. QXpanderTM is a trademark of QSound Labs, Inc. All rights reserved.

Introduction

Connections

	DVD-RAM		HDD
Can be	disc	Cannot be	HDD
Can be		Cannot be
recorded		copied

Recording permitted once

DVD-R

Cannot be recorded

Recording permitted once

Cannot be recorded

Recording prohibited

HDD

Basic Setup

DVD-RAM

disc

Cannot be

recorded DVD-R

Recording prohibited

HDD:Hard Disc Drive

Content that can be recorded once can only move from the HDD to a DVD-RAM disc. (The original one is deleted after moving to a DVD-RAM disc.)

9

Image 9

Contents RD-XS52SU RD-XS52SC RD-KX50SU See service procedure This HDD/DVD video recorder employs a Laser SystemMay result in hazardous radiation exposure Location of the required label Important Safety Instructions Additional Safety Instructions Precautions When not in useIntroduction Exemptions Power OutageDo not use the unit when moisture condensation may occur Introduction PrecautionsWait Moisture condensation occurs during the following casesConnections Accessories Remote control Batteries AAA x Installation procedureVideo/Audio cable IR control cable Registration cardAbout this product For recording / playback Disc Mark Specification Remarks Using different disc types for different purposesChoosing a disc DVD-RAM discs for your personal libraryDisc For playback only Disc Mark Specification RemarksOn DVD-RAM discs To protect recorded contentsIntroduction Choosing a disc DVD-RAM discs with cartridges are recommended for recordingMarks on DVD video discs On DVD-R discsOn cleaning discs Structure of disc contentsOn handling discs On storing discsTable of Contents Operating with the remote control Preparation of the remote controlOpen the cover Insert batteries AAA size Close the coverConnection procedure When you connect a TV equipped with audio/ video inputsWhen you connect an audio system Connections Connecting an antenna and TVConnect to a TV equiped with audio/video inputs Connect the power cord of the recorder to a wall outletConnecting to cable TV signal This set-up will allow you toYou will need to Component Output When the satellite system has audio/video outputs Connecting to a satellite systemConnecting the IR control cable Signal sensor of the set top boxTransmitter About Hdmitm Connecting to a TV with the Hdmi terminalAudio setting for the Hdmi connection Component video outputs/inputs Connecting to aTV equipped with component video inputsDigital audio input Connecting to an audio systemPage Basic Setup Turning the power on Basic SetupON/STANDBY button ON/STANDBY indicator Turning the power offStartup/finishing closing icons Press Setup Initial settingsIf a message appears Tip on settingExample of the icon FunctionLanguage setting Basic Setup Initial settingsPress / to select a language, then press Auto clock setting Time and date settingPress / to select Auto or Manual, then press Enter AutoAuto Press EnterUse No UsePress / and Adjust / to set the clock Manual clock settingAfter setting all the items, press Enter Press / to select Yes, then press EnterChannel setting Press / to select Channel setting, then press EnterPress / to select TV or Cable, then press Enter Channel reference Press / to select Auto, then pressAdding or erasing channels Preparation Set top box settingPress , then press Adjust or / to select Off or On PressOff 10Press Setup RCA Set top box brand codeSample of a Guide channel chart from a local TV listing Guide channel settingGuide channel number 33 HBO Press Setup to display the setup menu Output sound settingPress / to select Picture/Audio settings, then press Enter Press / to select Audio out select, then press EnterPress / to select the output sound format Once the proper setting is selected, pressBitstream Analog 2chTV shape setting Press / to select Display settings, then press EnterPress / to select TV shape, then press Press / to select the picture shape When the proper setting is selected, pressOperating a TV with the remote control of this recorder Remote control settingsOperating your TV with the remote control Release TV CodeJVC Brand code tablePress / to select Operational settings, then press Enter Setting up the recorder Press SetupPress / to select IR code, then press Press / to select DR 2 example, then press EnterDisabling the remote control for a temporary period Limited One 1 Year Warranty on Parts Limited Ninety 90 Day Warranty on LaborRental Units Commercial UnitsHow to Obtain Warranty Services Canadian Warranty Information Garantie Canadienne Memo Printed on 70% Recycled Paper