Toshiba RD-KX50SU, RD-XS52SU, RD-XS52SC Connecting to an audio system, Digital audio input

Page 29

Connections

Connecting to an audio system

You can enjoy multichannel surround-sound such as 5.1 channel by connecting to an amplifier compatible with Dolby Digital and DTS sound.

For connection to your TV, see pages 20 to 21, 28.

For details of output sound, see page 75 in “OPERATIONS GUIDE”.

Caution

When you are connecting (via the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack) an AV decoder that does not have

Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Audio out select” to “PCM”

from the on-screen displays ( page 48). Otherwise, high volume sound may damage your hearing as well as the speakers.

When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the analog audio out (L/R) jacks of the recorder are connected to an amplification system. To enjoy DTS Digital Surround® playback, an external 5.1 channel DTS Digital Surround® decoder system must be connected to the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack of the recorder.

Amplifier

 

 

 

 

 

 

 

HDMI OUTPUT

To OPTICAL type

DIGITAL AUDIO

Y

PB

PR

R

L

VIDEO

S-VIDEO

digital audio input

OUTPUT

 

 

 

 

 

 

 

BITSTREAM/PCM

 

 

COMPONENT OUTPUT

 

 

 

INPUT1

 

 

 

 

OUTPUT

 

 

 

INPUT3

 

OPTICAL

R

L

VIDEO S-VIDEO

R

L

VIDEO

S-VIDEO

To DIGITAL AUDIO OUTPUT

BITSTREAM/PCM

Optical digital cable (not supplied)

Introduction

Connections

Manufactured under license from Dolby Laboratories. “Dolby” and

• Make the setting on

page 48, “Audio out select”.

the double-D symbol are trademarks of Dolby Laboratories.

 

 

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Notes

DO NOT connect the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack of the recorder to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack of the recorder.

Connect the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack of the recorder to the “OPTICAL” input of a Receiver or Processor.

Refer to the owner’s manual for the TV to be connected to this recorder for more information concerning connecting an audio system.

The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier’s volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

Turn off the amplifier before you connect or disconnect the recorder’s power cord. If you leave the amplifier power on, the speakers may be damaged.

Basic Setup

29

Image 29
Contents RD-XS52SU RD-XS52SC RD-KX50SU May result in hazardous radiation exposure See service procedureThis HDD/DVD video recorder employs a Laser System Location of the required label Important Safety Instructions Additional Safety Instructions Introduction PrecautionsWhen not in use Exemptions Power OutageDo not use the unit when moisture condensation may occur Introduction PrecautionsWait Moisture condensation occurs during the following casesConnections Accessories Remote control Batteries AAA x Installation procedureVideo/Audio cable IR control cable Registration cardAbout this product For recording / playback Disc Mark Specification Remarks Using different disc types for different purposesChoosing a disc DVD-RAM discs for your personal libraryDisc For playback only Disc Mark Specification RemarksOn DVD-RAM discs To protect recorded contentsIntroduction Choosing a disc DVD-RAM discs with cartridges are recommended for recordingMarks on DVD video discs On DVD-R discsOn cleaning discs Structure of disc contentsOn handling discs On storing discsTable of Contents Operating with the remote control Preparation of the remote controlOpen the cover Insert batteries AAA size Close the coverWhen you connect an audio system Connection procedureWhen you connect a TV equipped with audio/ video inputs Connections Connecting an antenna and TVConnect to a TV equiped with audio/video inputs Connect the power cord of the recorder to a wall outletYou will need to Connecting to cable TV signalThis set-up will allow you to Component Output When the satellite system has audio/video outputs Connecting to a satellite systemTransmitter Connecting the IR control cableSignal sensor of the set top box About Hdmitm Connecting to a TV with the Hdmi terminalAudio setting for the Hdmi connection Component video outputs/inputs Connecting to aTV equipped with component video inputsDigital audio input Connecting to an audio systemPage Basic Setup Turning the power on Basic SetupON/STANDBY button ON/STANDBY indicator Turning the power offStartup/finishing closing icons Press Setup Initial settingsIf a message appears Tip on settingExample of the icon FunctionPress / to select a language, then press Language settingBasic Setup Initial settings Auto clock setting Time and date settingPress / to select Auto or Manual, then press Enter AutoAuto Press EnterUse No UsePress / and Adjust / to set the clock Manual clock settingAfter setting all the items, press Enter Press / to select Yes, then press EnterPress / to select TV or Cable, then press Enter Channel settingPress / to select Channel setting, then press Enter Adding or erasing channels Channel referencePress / to select Auto, then press Preparation Set top box settingOff Press , then press Adjust or / to select Off or OnPress 10Press Setup RCA Set top box brand codeSample of a Guide channel chart from a local TV listing Guide channel settingGuide channel number 33 HBO Press Setup to display the setup menu Output sound settingPress / to select Picture/Audio settings, then press Enter Press / to select Audio out select, then press EnterPress / to select the output sound format Once the proper setting is selected, pressBitstream Analog 2chPress / to select TV shape, then press TV shape settingPress / to select Display settings, then press Enter Press / to select the picture shape When the proper setting is selected, pressOperating a TV with the remote control of this recorder Remote control settingsOperating your TV with the remote control Release TV CodeJVC Brand code tablePress / to select Operational settings, then press Enter Setting up the recorder Press SetupPress / to select IR code, then press Press / to select DR 2 example, then press EnterDisabling the remote control for a temporary period Limited One 1 Year Warranty on Parts Limited Ninety 90 Day Warranty on LaborRental Units Commercial UnitsHow to Obtain Warranty Services Canadian Warranty Information Garantie Canadienne Memo Printed on 70% Recycled Paper