Connections
Connecting to aTV equipped with component video inputs
If your TV has component video inputs, you can obtain pictures in better quality.
To PB VIDEO OUT |
|
|
|
|
|
|
|
|
|
To Y VIDEO OUT |
|
| To PR VIDEO OUT |
|
|
|
|
|
|
|
|
|
|
|
| HDMI OUTPUT |
| RF IN | |
|
|
|
|
|
|
| (FROM ANT.) | ||
|
|
|
|
|
|
|
|
| |
DIGITAL AUDIO | Y | PB | PR | R | L | VIDEO |
|
| |
OUTPUT |
|
| |||||||
|
|
|
|
|
|
|
|
| |
BITSTREAM/PCM |
|
| COMPONENT OUTPUT |
|
|
| INPUT1 |
| RF OUT |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| (TO TV) |
|
|
| OUTPUT |
|
|
| INPUT3 |
| CHANNEL |
|
|
|
|
|
|
|
|
| |
OPTICAL R | L | VIDEO | R | L | VIDEO | IR | CHANGE | ||
VHF / UHF | |||||||||
(red) 
(white)
Audio cable (not supplied)
To audio inputs of the 
amplifier
(red) 
(white)
TV or monitor equipped with component video (INTERLACED/ PROGRESSIVE) inputs
Video cable (not supplied)
To PR video input
To PB video input
To Y video input
Component video outputs/inputs
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.
Actual labels for component video inputs may vary depending on the TV manufacturer. (ex.Y,
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.
•Make the following setting.
Select | Page | |
|
|
|
“Audio out select” | “Analog 2ch” | page 48 |
|
|
|
Notes
To switch the output signal (Progressive/Interlaced) PROG/HDMI Press PROG/HDMI button to change the 
video output signals (progressive and
interlace) from COMPONENT OUTPUT jacks. Change the output signals as shown on the HDMI indicator on the front panel.
|
|
| HDMI indicator | Video output signal | ||
Press |
|
|
| |||
illuminates “ | 1080i” | 480p (progressive) | ||||
|
|
| ||||
|
|
|
| Press |
| |
|
|
|
|
|
| |
|
|
| illuminates “ | 720p” | 480p (progressive) | |
|
|
|
| Press |
| |
|
|
|
|
|
| |
|
|
| illuminates “ | 480p” | 480p (progressive) | |
|
|
|
| Press |
| |
|
|
|
|
|
| |
|
|
| off |
| 480i (interlace) | |
|
|
|
| |||
|
|
|
|
|
| |
•Refer to the owner’s manual for the TV to be connected to this recorder for more information concerning an audio system.
•If you place the recorder near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the recorder away from the tuner and radio.
•The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier’s volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by sudden high volume sound.
•Turn off the amplifier before you connect or disconnect the recorder’s power cord. If you leave the amplifier power on, the speakers may be damaged.
•PROG/HDMI button is not available during the operations below.
-All HDD title delete, HDD format,
28