Toshiba RD-KX50SU, RD-XS52SU, RD-XS52SC owner manual About this product

Page 11

Introduction

About this product

Some differences

Because of its recording capacity and hard disc drive (HDD), this DVD recorder operates more like a computer and differently than a standard DVD player. In addition to containing a microprocessor, it contains a HDD, an operating system, random access memory (RAM), and a DVD-RAM/R drive. The operating system includes software stored on the HDD that is transferred to the RAM when the machine is turned on and at other times during operation. This transfer can take time. Therefore, when you turn the DVD recorder on, it may take a little while before it is ready to use. Likewise, other functions may not be performed as quickly as they would on other AV equipment. Additionally, because programs stored on the DVD-RAM/R drive cannot be accessed as quickly as those stored on the HDD, accessing those programs (or deleting a program from a DVD-RAM disc) may take more time. Please take these factors into consideration as you use the DVD recorder.

About the hard disc drive (HDD)

Like any HDD, the HDD in the DVD recorder is a fragile device that is susceptible to partial or complete failure if it is jarred or as a result of use over time. It will not last forever. Therefore, do not use the HDD for longer term storage of programs you wish to retain. [If portions of the HDD become damaged, programs recorded on those portions may exhibit pixelization or block noise when played back. Repeated playback of the program may cause the problem to get worse and, eventually, the program may become unplayable. Accordingly, if you notice such noise in a program that you want to save, you should transfer to a recordable DVD disc as soon as possible.] Recordable DVD discs are also susceptible to damage if not handled and stored carefully and some or all of the programs on them may become unplayable. You can reduce these risks by using high quality DVD recordable discs and checking their playability from time to time. If it becomes necessary to service your DVD recorder, it may be necessary to delete some or all of the programs on the HDD.

Playback Restrictions

This owner’s manual explains the basic instructions for this recorder. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the recorder may not respond to all operating commands. This is not a defect in the recorder. Please refer to the notes on compatible discs later in this Introduction and to the discussion of DVD playback and features later in this manual.

” may appear on the TV screen during operation. “” means that the operation is not permitted by the recorder or the disc.

Recording Restrictions and Copyright

Copy-protected contents of DVD-Video discs, VIDEO CDs or audio CDs on the market cannot be copied on this recorder. Contents without copy protection should be copied or edited only in accordance with applicable copyright laws, which may restrict copying or editing.

Contents that permit single copying (copy once contents) can be recorded onto DVD-RAM discs, with some dubbing and editing restrictions. DVD-R discs cannot record these contents.

The unauthorized recording, use, distribution, or revision of copyrighted materials including, without limitation, television programs, videotapes, and DVDs, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Compatibility

In isolated cases, a disc bearing the DVD or CD logo may not fully and properly play back all features or as intended by the creator of the disc. This can be due, among other reasons, to problems and errors that can occur during the creation or recording of DVD and other software and the manufacture of software discs (including blank discs). Moreover, because of variations in the quality of discs, this recorder may not be able to record on all discs that bear a DVD-RAM or DVD-R logo, but you should not encounter difficulty if you use only high quality recordable DVD discs. Additionally, discs recorded in this device may not operate properly in other DVD players, recorders and/or personal computer drives. If you happen to encounter difficulties playing or recording a DVD disc or playing a CD disc, please feel free to call our Customer Service Hotline at 1-800-319-6684.

Introduction

Connections

Basic Setup

11

Image 11
Contents RD-XS52SU RD-XS52SC RD-KX50SU May result in hazardous radiation exposure See service procedureThis HDD/DVD video recorder employs a Laser System Location of the required label Important Safety Instructions Additional Safety Instructions Introduction PrecautionsWhen not in use Exemptions Power Outage Moisture condensation occurs during the following cases Introduction Precautions Do not use the unit when moisture condensation may occur WaitConnections Registration card Installation procedureAccessories Remote control Batteries AAA x Video/Audio cable IR control cableAbout this product DVD-RAM discs for your personal library Using different disc types for different purposesFor recording / playback Disc Mark Specification Remarks Choosing a discDisc For playback only Disc Mark Specification RemarksDVD-RAM discs with cartridges are recommended for recording To protect recorded contentsOn DVD-RAM discs Introduction Choosing a discMarks on DVD video discs On DVD-R discsOn storing discs Structure of disc contentsOn cleaning discs On handling discsTable of Contents Close the cover Preparation of the remote controlOperating with the remote control Open the cover Insert batteries AAA sizeWhen you connect an audio system Connection procedureWhen you connect a TV equipped with audio/ video inputs Connections Connecting an antenna and TVConnect to a TV equiped with audio/video inputs Connect the power cord of the recorder to a wall outletYou will need to Connecting to cable TV signalThis set-up will allow you to Component Output When the satellite system has audio/video outputs Connecting to a satellite systemTransmitter Connecting the IR control cableSignal sensor of the set top box About Hdmitm Connecting to a TV with the Hdmi terminalAudio setting for the Hdmi connection Component video outputs/inputs Connecting to aTV equipped with component video inputsDigital audio input Connecting to an audio systemPage Basic Setup Turning the power off Basic SetupTurning the power on ON/STANDBY button ON/STANDBY indicatorStartup/finishing closing icons Press Setup Initial settingsFunction Tip on settingIf a message appears Example of the iconPress / to select a language, then press Language settingBasic Setup Initial settings Auto Time and date settingAuto clock setting Press / to select Auto or Manual, then press EnterNo Use Press EnterAuto UsePress / to select Yes, then press Enter Manual clock settingPress / and Adjust / to set the clock After setting all the items, press EnterPress / to select TV or Cable, then press Enter Channel settingPress / to select Channel setting, then press Enter Adding or erasing channels Channel referencePress / to select Auto, then press Preparation Set top box settingOff Press , then press Adjust or / to select Off or OnPress 10Press Setup RCA Set top box brand codeSample of a Guide channel chart from a local TV listing Guide channel settingGuide channel number 33 HBO Press / to select Audio out select, then press Enter Output sound settingPress Setup to display the setup menu Press / to select Picture/Audio settings, then press EnterAnalog 2ch Once the proper setting is selected, pressPress / to select the output sound format BitstreamPress / to select TV shape, then press TV shape settingPress / to select Display settings, then press Enter Press / to select the picture shape When the proper setting is selected, pressRelease TV Code Remote control settingsOperating a TV with the remote control of this recorder Operating your TV with the remote controlJVC Brand code tablePress / to select DR 2 example, then press Enter Setting up the recorder Press SetupPress / to select Operational settings, then press Enter Press / to select IR code, then pressDisabling the remote control for a temporary period Commercial Units Limited Ninety 90 Day Warranty on LaborLimited One 1 Year Warranty on Parts Rental UnitsHow to Obtain Warranty Services Canadian Warranty Information Garantie Canadienne Memo Printed on 70% Recycled Paper