Toshiba kV-9960A How to Release Auto Recording, How to Forbid Auto Recording, Press the + or SET

Page 34

INTRODUCTION

Press the + or – SET

5 button to set the auto recording time mode.

DISPLAY	– TIME MODE +
	SET
	SHIFT	TRACKING
	SHIFT
		LOCATION SELECT

PROGRAM FR1 ON --:-- ➜ --:-- SP120 FR2 ON --:-- ➜ --:-- SP120 SA1 ON --:-- ➜ --:-- SP120 SA2 ON --:-- ➜ --:-- SP120 SU1 ON --:-- ➜ --:-- SP120 SU2 ON --:-- ➜ --:-- SP120 DLY ON --:-- ➜ --:-- SP120

EXT ON		SP 24
	MENU=[DISPLAY]

Press the TIMER button to set the timer recording or

7 timer standby mode.

PREPARATION

Press the DISPLAY

6 buttondisplay.twice to erase the

DISPLAY – TIME MODE +

SET

SHIFT	TRACKING
SHIFT
	LOCATION SELECT

8/28/97 THU 17:30:02 SPA 2

Turn on the auto recording switch on .

8 While switch is on, recording is available.

ON

To external control input

To GND

RECORDING

OPERATION

PLAYBACK	OPERATION

NOTICE

How to Release Auto Recording

Press TIMER button to release the timer mode.

How to Forbid Auto Recording

PROGRAM

FR1 ON --:-- ➜ --:-- SP120

FR2 ON --:-- ➜ --:-- SP120

SA1 ON --:-- ➜ --:-- SP120

SA2 ON --:-- ➜ --:-- SP120

SU1 ON --:-- ➜ --:-- SP120

SU2 ON --:-- ➜ --:-- SP120

DLY ON --:-- ➜ --:-- SP120

EXT	SKIP	SP120
		MENU=[DISPLAY]

Notes:

iAuto Recording is available only at the timer mode (timer recording, timer standby).

iWhen Timer Recording coincides with Auto Recording, Auto Recording will take priority.

33

Image 34

Contents Instruction Manual Important Precautions Please ReadRadiators, heat registers, stoves Important Safety InstructionsPower Sources Unplug this product from the wallWhen the power-supply cord or plug is damaged AccessoriesPower Lines To restore the product to its normal operationFeatures Table of ContentsInstructions in Brief Front PanelCassette Compartment Time Mode / SET + buttonsTape Remain button Display buttonRear Panel Installation Word on the Exclusive 3N-100AAS Battery PackSpecification of Battery RemovalVCR Display Press to start play back REW buttonFF button Connections Connection with a Video CameraTo REC TRIGG. OUT Typical Connection with the Sequential SwitcherVideo OutputContents of Screen Display Alarm Recall Screen Setting the Clock OperationVCR display ON-SCREEN FunctionsDate-Time Display Monitor screenDisplay Screen Changes to the alarm number Alarm numberIs pressed. When an alarm is This function enables to indicate and record informationCounter Displays Alarm MemoryWhen the tape reaches Counter MemoryTape Remain Error MessageRegarding the error code E-6 Display Code Number Condition of AbnormalityHOW to Operate 24 Hour Virtual Real Time Mode Setting the RECORDING/PLAY Back TimeMode display Loading a Cassette Loading and Unloading a Video CassetteUnloading a Cassette Recording Camera and monitor TV Not been removedSetting the Restart Recording Restart RecordingDaily Timer Recording Timer RecordingSetting the Timer Program Program ScreenShould be more than 1 minute. If they are same, timer Time Mode button is pressed, the displayPress the Timer button During timer power off mode, alarm recording will notPress the Shift ButtonGRAM.to blink PRO Weekly Timer RecordingPress the Shift Button to blink the MO1 start time FR2 Overlapping ProgramsExample DLYAlarm Recall Display Alarm RecordingOperation at Alarm Input Event Recording Connecting the Alarm Terminals Cont Setting the Alarm RecordingDisplay Recording time ManualOperation of Auto Recording Connecting the External control terminalAuto Recording Auto recordingPress Timer button to release the timer mode How to Release Auto RecordingHow to Forbid Auto Recording Press the + or SETOperation After Tape END Detection How to Set to Stop at End of TapeSetting contents Buzzer Screen display Counter display Display Operation after detection of tape endAlarm recording does not operate during auto-rewind How to Set to Auto Rewind at End of TapeMenu Screen How to Set to Repeat Record at End of Tape ButtonREC. to select REW →Timing for Camera Switching Recording with the Sequential SwitcherConnection with the Sequential Switcher C D a B C DButton to set the REC REC Trigger Output Selection in the Alarm RecordingPress the Shift Trigger SELRecording time mode Time mode for playback Tracking AdjustmentPlayback Picture Search Play Using the Shuttle DialREW Stop Slow Still PlayPlayback in Various Modes Search Operation Time Date SearchPress the SET button to Set the Minute to Alarm M to light Alarm SearchStill picture mode Press the Play button Signal Levels of INPUT/OUTPUT Terminals Input/Output terminal Signal level Additional remarksDaily and Periodic Inspection Check the playback picture recorded in SPA2 modePress the or Time Mode button to go to SPA2 mode Order of Daily ChecksRequest for Periodic Checks Steps to Take after Daily ChecksTape Usage Frequency Dew Condensation Function/Operation Before Calling Service PersonnelInstallation RecordingPlayback Other mattersAccessories SpecificationsConnector section Dew caution sheetLimited Warranty 70971826