Toshiba kV-9960A instruction manual Playback, Other matters

Page 50

PREPARATIONINTRODUCTION

RECORDING

OPERATION

 

 

PLAYBACK

OPERATION

 

 

NOTICE

Playback

There is excessive noise in the playback picture.

i Adjust with the TRACKING button.

The playback picture is not clear.

i The video head may be clogged or worn out.

 

Consult with your dealer.

The time-lapse mode playback picture or still

i Press the TRACKING button in a still playback mode and adjust.

playback shakes up and down.

 

Two recorded sections appear in the playback

i Are you using an external synchronous or gen-lock synchronous

picture when using several video cameras and

video camera?

changing cameras.

Consult with your dealer.

When the VCR power plug is inserted to the AC

i Is restart recording set to ON?

outlet, recording starts and playback is not possible.

 

 

 

Other matters

No screen display appears.

i Has DISPLAY MODE been set?

 

i Is the On-Screen position correct?

Recording does not continue automatically after

i Did the power failure continue for more than 10 days?

restoring power following a power failure.

 

Black/white picture appears in playback through

i Playback is carried out with the VIDEO MODE switch set to B/W

color camera signals are recorded.

position.

 

i Recording is carried out with the VIDEO MODE switch set to B/W

 

position.

 

 

Pictures are colored in playback through black/

i Playback is carried out with the VIDEO MODE switch set to COLOR

white camera signals are recorded.

position.

 

i Recording is carried out with the VIDEO MODE switch set to

 

COLOR position.

 

 

Cautions:

iDo not install the VCR in a location near heat sources, such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibrations or impacts.

iAllow adequate air circulation to prevent internal heat build-up. Do not place the VCR on soft surfaces (rugs, blankets, etc.), too near materials such as curtains and draperies or in a built-in installation such as a bookcase or rack.

iKeep the VCR and the video cassettes away from strong magnetic fields.

iTo disconnect the lead, pull it out by the plug. Never pull the lead itself.

iDo not drop any inflammable or metallic objects, or liquid into the VCR. This may cause damage to the VCR.

iDo not hit or shake the VCR when moving it. This may cause damage.

iRemove the cassette from the VCR when not in use.

iSave the original carton and packing materials: they will come in handy if you ever have to transport your VCR. For maximum protections, repack the VCR as it was originally packed at the factory.

iDo not use volatile liquids such as insect spray near the VCR.

Do not leave rubber or plastic products touching the VCR for a long time. They will damage the finish.

Notes:

iWhen the TIME MODE is changed during recording, noises will occur for an instant on the screen and sound at that the TIME MODE changed area in the playback.

iWhen the TIME MODE is changed during playback, noises will occur for an instant on the screen and sound.

iIn the cases shown below, the VCR sets the power on first for 1 ~ 2 s, and turns the power to off with display “OFF”.

•When the ALL clear button is pressed.

•When the power cord plug is connected after disconnected during the VCR display “OFF”.

•When the power supply is resumed from power failure during the VCR display “OFF”.

49

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Instruction Manual Important Precautions Please ReadRadiators, heat registers, stoves Important Safety InstructionsPower Sources Unplug this product from the wallWhen the power-supply cord or plug is damaged AccessoriesPower Lines To restore the product to its normal operationFeatures Table of ContentsInstructions in Brief Front PanelCassette Compartment Time Mode / SET + buttonsTape Remain button Display buttonRear Panel Installation Word on the Exclusive 3N-100AAS Battery PackSpecification of Battery RemovalVCR Display FF button REW buttonPress to start play back Connections Connection with a Video CameraTo REC TRIGG. OUT Typical Connection with the Sequential SwitcherVideo OutputContents of Screen Display Alarm Recall Screen Setting the Clock OperationVCR display ON-SCREEN FunctionsDate-Time Display Monitor screenDisplay Screen Changes to the alarm number Alarm numberIs pressed. When an alarm is This function enables to indicate and record informationCounter Displays Alarm MemoryWhen the tape reaches Counter MemoryTape Remain Error MessageRegarding the error code E-6 Display Code Number Condition of AbnormalityMode display Setting the RECORDING/PLAY Back TimeHOW to Operate 24 Hour Virtual Real Time Mode Unloading a Cassette Loading and Unloading a Video CassetteLoading a Cassette Recording Camera and monitor TV Not been removedSetting the Restart Recording Restart RecordingDaily Timer Recording Timer RecordingSetting the Timer Program Program ScreenShould be more than 1 minute. If they are same, timer Time Mode button is pressed, the displayPress the Timer button During timer power off mode, alarm recording will notPress the Shift Button to blink the MO1 start time Weekly Timer RecordingPress the Shift ButtonGRAM.to blink PRO FR2 Overlapping ProgramsExample DLYAlarm Recall Display Alarm RecordingOperation at Alarm Input Event RecordingConnecting the Alarm Terminals Cont Setting the Alarm RecordingDisplay Recording time ManualOperation of Auto Recording Connecting the External control terminalAuto Recording Auto recordingPress Timer button to release the timer mode How to Release Auto RecordingHow to Forbid Auto Recording Press the + or SETOperation After Tape END Detection How to Set to Stop at End of TapeSetting contents Buzzer Screen display Counter display Display Operation after detection of tape endMenu Screen How to Set to Auto Rewind at End of TapeAlarm recording does not operate during auto-rewind How to Set to Repeat Record at End of Tape ButtonREC. to select REW →Timing for Camera Switching Recording with the Sequential SwitcherConnection with the Sequential Switcher C D a B C DButton to set the REC REC Trigger Output Selection in the Alarm RecordingPress the Shift Trigger SELPlayback Tracking AdjustmentRecording time mode Time mode for playback Picture Search Play Using the Shuttle DialREW Stop Slow Still PlayPlayback in Various Modes Press the SET button to Set the Minute to Time Date SearchSearch Operation Still picture mode Press the Play button Alarm SearchAlarm M to light Signal Levels of INPUT/OUTPUT Terminals Input/Output terminal Signal level Additional remarksDaily and Periodic Inspection Check the playback picture recorded in SPA2 modePress the or Time Mode button to go to SPA2 mode Order of Daily ChecksTape Usage Frequency Steps to Take after Daily ChecksRequest for Periodic Checks Dew Condensation Function/Operation Before Calling Service PersonnelInstallation RecordingPlayback Other mattersAccessories SpecificationsConnector section Dew caution sheetLimited Warranty 70971826
Top Page Image Contents