INTRODUCTION
The VCR can be programmed to automatically rewind the tape when the tape reaches its end.
How to Set to Auto Rewind at End of Tape
PREPARATION
Press the DISPLAY
1 button.
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
M E N U
CLOCK ADJUST SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH
END=[DISPLAY]
Press the + or – SET
4 buttonSTOP.to select REW →
DISPLAY | – TIME MODE + | |
| SET |
|
| SHIFT | TRACKING |
|
| |
|
| LOCATION SELECT |
S E T U P
ALARM REC TIME | 15S | |
SPEED | SPA 2 | |
RESTART REC | OFF | |
TAPE END MODE |
| REW➜STOP |
ALARM | STOP | |
MENU=[DISPLAY]
Press the 
or 
SHIFT
2 button to blink SETUP and press the + SET button.
DISPLAY – TIME MODE +
SET |
|
SHIFT | TRACKING |
| |
| LOCATION SELECT |
M E N U
CLOCK ADJUST SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH
END=[DISPLAY]
Press the DISPLAY
5 buttondisplay.twice to erase the
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
8/28/97 THU 17:30:02SPA 2
RECORDING | OPERATION |
Press the 
or 
SHIFT
3 button to blink TAPE END MODE.
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
S E T U P |
|
|
ALARM REC TIME | 15S | |
SPEED | SPA 2 | |
RESTART REC | OFF | |
TAPE END MODE | STOP |
|
ALARM | STOP | |
MENU=[DISPLAY]
iWhen tape end is detected during recording, the tape automatically rewinds and stops at beginning of the tape.
Caution:
If you need the VCR to Auto Rewind even if an alarm condi- tion occurred then set TAPE END ALARM to “CONT.” in the
MENU SCREEN.
PLAYBACK | OPERATION |
NOTICE
Note:
iAlarm recording does not operate during auto-rewind.
35