Toshiba kV-9960A Recording with the Sequential Switcher, Connection with the Sequential Switcher

Page 38

PREPARATIONINTRODUCTION

RECORDING

OPERATION

 

 

PLAYBACK

OPERATION

 

 

NOTICE

RECORDING WITH THE SEQUENTIAL SWITCHER

This VCR can work with a sequential switcher connected for recording.

Connection with the Sequential Switcher

For detailed operations and connections of the switcher, consult the Instruction Manual of the sequential switcher.

Sequential

switcher

To REC trigg. out

To trigger input

To trigger grounding

To GND

Timing for Camera Switching

In case of using the sequential switcher for 4 channels (and recording for EPA18 mode);

Video track

A B C D A B C D

Vertical synchronization

0.05 s

0.05 s

0.05 s

0.05 s

camera

camera

camera

camera

A

B

C

D

Notes:

iEach time a video track is recorded, the video camera is automatically switched by the position of the vertical synchroniza- tion signal.

iThe video camera switching time differs according to the time mode.

iRecord/playback picture is snowy or noisy when operating with a B/W multiplex or B/W quad, please select the VIDEO MODE switch to B/W mode. (See page 5.)

iIn EPA18 record mode, quick response switcher is necessary.

37

Image 38
Contents Instruction Manual Important Precautions Please ReadRadiators, heat registers, stoves Important Safety InstructionsPower Sources Unplug this product from the wallWhen the power-supply cord or plug is damaged AccessoriesPower Lines To restore the product to its normal operationFeatures Table of ContentsInstructions in Brief Front PanelCassette Compartment Time Mode / SET + buttonsTape Remain button Display buttonRear Panel Installation Word on the Exclusive 3N-100AAS Battery PackSpecification of Battery RemovalVCR Display FF button REW buttonPress to start play back Connections Connection with a Video CameraTo REC TRIGG. OUT Typical Connection with the Sequential SwitcherVideo OutputContents of Screen Display Alarm Recall Screen Setting the Clock OperationVCR display ON-SCREEN FunctionsDate-Time Display Monitor screenDisplay Screen Changes to the alarm number Alarm numberIs pressed. When an alarm is This function enables to indicate and record informationCounter Displays Alarm MemoryWhen the tape reaches Counter MemoryTape Remain Error MessageRegarding the error code E-6 Display Code Number Condition of AbnormalityMode display Setting the RECORDING/PLAY Back TimeHOW to Operate 24 Hour Virtual Real Time Mode Unloading a Cassette Loading and Unloading a Video CassetteLoading a Cassette Recording Camera and monitor TV Not been removedSetting the Restart Recording Restart RecordingDaily Timer Recording Timer RecordingSetting the Timer Program Program ScreenShould be more than 1 minute. If they are same, timer Time Mode button is pressed, the displayPress the Timer button During timer power off mode, alarm recording will notPress the Shift Button to blink the MO1 start time Weekly Timer RecordingPress the Shift ButtonGRAM.to blink PRO FR2 Overlapping ProgramsExample DLYAlarm Recall Display Alarm RecordingOperation at Alarm Input Event RecordingConnecting the Alarm Terminals Cont Setting the Alarm RecordingDisplay Recording time ManualOperation of Auto Recording Connecting the External control terminalAuto Recording Auto recordingPress Timer button to release the timer mode How to Release Auto RecordingHow to Forbid Auto Recording Press the + or SETOperation After Tape END Detection How to Set to Stop at End of TapeSetting contents Buzzer Screen display Counter display Display Operation after detection of tape endMenu Screen How to Set to Auto Rewind at End of TapeAlarm recording does not operate during auto-rewind How to Set to Repeat Record at End of Tape ButtonREC. to select REW →Timing for Camera Switching Recording with the Sequential SwitcherConnection with the Sequential Switcher C D a B C DButton to set the REC REC Trigger Output Selection in the Alarm RecordingPress the Shift Trigger SELPlayback Tracking AdjustmentRecording time mode Time mode for playback Picture Search Play Using the Shuttle DialREW Stop Slow Still PlayPlayback in Various Modes Press the SET button to Set the Minute to Time Date SearchSearch Operation Still picture mode Press the Play button Alarm SearchAlarm M to light Signal Levels of INPUT/OUTPUT Terminals Input/Output terminal Signal level Additional remarksDaily and Periodic Inspection Check the playback picture recorded in SPA2 modePress the or Time Mode button to go to SPA2 mode Order of Daily ChecksTape Usage Frequency Steps to Take after Daily ChecksRequest for Periodic Checks Dew Condensation Function/Operation Before Calling Service PersonnelInstallation RecordingPlayback Other mattersAccessories SpecificationsConnector section Dew caution sheetLimited Warranty 70971826