Toshiba kV-9960A Before Calling Service Personnel, Installation, Function/Operation, Recording

Page 49

BEFORE CALLING SERVICE PERSONNEL

If you suspect a breakdown, check the following points before calling your serviceman for follow-up service.

Installation

Power does not go ON.

i Is the power plug securely inserted to an AC outlet?

 

 

There is no camera picture.

i Is the VCR properly connected to the TV, video camera and other

 

devices?

 

i Is there any problem with the connection of the connecting cords?

 

 

The camera picture is indistinct.

i Is the camera properly focused?

 

 

Function/Operation

The VCR does not operate even when the control

i Has a video tape been inserted?

buttons are pressed.

i Is the REMOTE switch OFF?

 

i Is the Dew lamp blinking?

 

The VCR is not operating because the safety functions are operat-

 

ing. Wait until the blinking stops with the Power switch ON.

The clock does not run after restoration of power

i Has the VCR’s power plug been removed from the AC outlet for a

following a power failure.

long period? Insert the power plug in the AC outlet and carry out

 

continuous charging for 48 hours or longer.

The buzzer does not sound.

i Is the BUZZER switch set to OFF? If off, the buzzer does not work.

 

 

Recording

Playback, fast forward and rewind are possible but

i Is the tab on the video cassette broken off?

recording is not possible.

i Is the video tape at tape end?

Recording has stopped.

i Have more than 10 minutes passed since pressing the PAUSE

 

button during recording?

 

 

Nothing is being recorded.

i Have you been carrying out regular daily checks?

 

If this phenomenon occurs often, something may be broken.

 

Consult with your dealer.

 

 

Not possible to record after restoring power following

i Is restart recording OFF?

a power failure.

i Has the power failure lasted for longer than 10 days?

Repeat recording is not possible.

i Is TAPE END MODE on REW→REC?

 

i Has one of the operations buttons been pressed during automatic

 

rewind?

 

i Is TAPE END ALARM on CONT?

 

 

Timer recording is not possible.

i Is the present time setting correct?

 

i Is the timer setting correct?

 

i Has the TIMER button been pressed?

 

i Did a power failure continue for a long period after the timer was

 

set?

 

i Has the POWER switch been turned ON?

 

i Has the power plug been removed from the AC outlet?

Alarm recording is not possible.

i Are the alarm sensor and the alarm input properly connected?

Auto recording is not possible

i Is the mode set to timer recording or timer standby?

 

i Are the remote control switch and external control input properly

 

connected?

INTRODUCTION

PREPARATION

RECORDING

OPERATION

PLAYBACK

OPERATION

NOTICE

48

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Instruction Manual Please Read Important PrecautionsPower Sources Important Safety InstructionsRadiators, heat registers, stoves Unplug this product from the wallPower Lines AccessoriesWhen the power-supply cord or plug is damaged To restore the product to its normal operationTable of Contents FeaturesFront Panel Instructions in BriefTape Remain button Time Mode / SET + buttonsCassette Compartment Display buttonRear Panel Specification of Battery Word on the Exclusive 3N-100AAS Battery PackInstallation RemovalVCR Display Press to start play back REW buttonFF button Connection with a Video Camera ConnectionsVideo Typical Connection with the Sequential SwitcherTo REC TRIGG. OUT OutputContents of Screen Display Alarm Recall Screen Operation Setting the ClockDate-Time Display ON-SCREEN FunctionsVCR display Monitor screenDisplay Screen Is pressed. When an alarm is Alarm numberChanges to the alarm number This function enables to indicate and record informationWhen the tape reaches Alarm MemoryCounter Displays Counter MemoryRegarding the error code E-6 Display Error MessageTape Remain Code Number Condition of AbnormalityHOW to Operate 24 Hour Virtual Real Time Mode Setting the RECORDING/PLAY Back TimeMode display Loading a Cassette Loading and Unloading a Video CassetteUnloading a Cassette Camera and monitor TV Not been removed RecordingRestart Recording Setting the Restart RecordingSetting the Timer Program Timer RecordingDaily Timer Recording Program ScreenPress the Timer button Time Mode button is pressed, the displayShould be more than 1 minute. If they are same, timer During timer power off mode, alarm recording will notPress the Shift ButtonGRAM.to blink PRO Weekly Timer RecordingPress the Shift Button to blink the MO1 start time Example Overlapping ProgramsFR2 DLYOperation at Alarm Input Alarm RecordingAlarm Recall Display Event RecordingConnecting the Alarm Terminals Display Recording time Setting the Alarm RecordingCont ManualAuto Recording Connecting the External control terminalOperation of Auto Recording Auto recordingHow to Forbid Auto Recording How to Release Auto RecordingPress Timer button to release the timer mode Press the + or SETSetting contents Buzzer Screen display Counter display How to Set to Stop at End of TapeOperation After Tape END Detection Display Operation after detection of tape endAlarm recording does not operate during auto-rewind How to Set to Auto Rewind at End of TapeMenu Screen ButtonREC. to select REW → How to Set to Repeat Record at End of TapeConnection with the Sequential Switcher Recording with the Sequential SwitcherTiming for Camera Switching C D a B C DPress the Shift REC Trigger Output Selection in the Alarm RecordingButton to set the REC Trigger SELRecording time mode Time mode for playback Tracking AdjustmentPlayback REW Stop Using the Shuttle DialPicture Search Play Slow Still PlayPlayback in Various Modes Search Operation Time Date SearchPress the SET button to Set the Minute to Alarm M to light Alarm SearchStill picture mode Press the Play button Input/Output terminal Signal level Additional remarks Signal Levels of INPUT/OUTPUT TerminalsPress the or Time Mode button to go to SPA2 mode Check the playback picture recorded in SPA2 modeDaily and Periodic Inspection Order of Daily ChecksRequest for Periodic Checks Steps to Take after Daily ChecksTape Usage Frequency Dew Condensation Installation Before Calling Service PersonnelFunction/Operation RecordingOther matters PlaybackConnector section SpecificationsAccessories Dew caution sheet70971826 Limited Warranty
Top Page Image Contents