Pioneer DVD-V7300D Weekly timer function operation/display, Setting/correcting the current time

Weekly timer function operation/display

1

2

ADV.SETUP	page 1/2
WEEKLY TIMER	OFF
POWER ON START	OFF
TITLE PLAY MODE	Single
REPEAT MODE	OFF
BAUD RATE	4800bps
TRAY LOCK	OFF
BLACKBOARD LOCK	OFF
STACK MODE OSD	ON
REV STEP/REV PLAY	VOBU
	SETUP	Exit

	ON
ADV.SETUP		page 1/2
WEEKLY TIMER		ON
POWER ON START		OFF
TITLE PLAY MODE		Single
REPEAT MODE		OFF
BAUD RATE		4800bps
TRAY LOCK		OFF
BLACKBOARD LOCK		OFF
STACK MODE OSD		ON
REV STEP/REV PLAY		VOBU
		SETUP	Exit

DVD.I Video CD.I CD .

Setting/correcting the current time

Set the current date and time.

1.Move the ‰ (pointer) to “WEEKLY TIMER”

by pressing or .

2.Press or and set to ON.

3.Press ENTER .

÷The Weekly Timer setting screen is displayed.

4.Press ENTER .

÷The date/time setting screen is displayed blinking.

5.Set the time of the day.

÷Set figures in order of year (2 digits), month, day, day of the week, hour, minute and second.

1/3 shows that there are three pages of setting,
3-4and that this screen is the first of these pages.
00–00–00 ––– 00:00.00 (1/3)
MON
TUE
WED
THU
FRI
SAT
SUN
ALL	RETURN

5

00–04–29 SAT 08:15.00 (1/3)

MON
TUE
WED
THU
FRI
SAT
SUN
ALL	RETURN

Note

÷The internal clock has a tolerance of approximately ±2 minutes per month. (The amount varies depending on the usage environment.)

÷The built-in clock is powered by a capacitor. The clock of this unit functions even when it is in the STANDBY mode, provided that the AC cord is plugged into a power outlet. If the AC cord is unplugged, the clock can con- tinue functioning for 7 to 10 days (when the capacitor is fully charged and at 25°C) .

÷Weekly timer setting is kept remembered as if AC cord is unplugged for long times.

These figures can be input in any of the fol- lowing two methods.

A. Input using the numeric buttons and NEXT

B. Input using or and ENTER

÷“A” and “B” in the following description refers respec- tively to the two operation methods above.

Example) To set to 8:15:00, Saturday April 29, 2000

A: Press		0		=	0	= NEXT		=	0	= 4
= NEXT		=	0	2	=	9	= NEXT		=	5	=
NEXT	=			=		8	= NEXT		=	1	=

5= NEXT = 0 = 0 = NEXT .

*The days of the week can be set using the fol- lowing numeric buttons.

MON: 0,	TUE: 1,	WED: 2, THU: 3,
FRI: 4,	SAT: 5,	SUN: 6.

B:Press the or to select 00 and press ENTER to start the setting of the next

set of figures (the month in this case). Set the month, date, day of the week, hour, minute and second, and press ENTER to complete the setting operation.

To correct the date or time ENTER

When the setting screen appears in step 3 above, press

so that the figures of the year start to blink. Then press NEXT 4 times so that the figures of hour blink, and set them with the same method as above.

50

En