To change the display mode

Indicator on the top of right

GROUP 001

001 R–3, RED 02-015.29~015.36 A

AUTO DISP SAVE DEL EXIT

Notes

÷It takes time to draw a graphical image, so if you are using it to hide part of the video image, the image-drawing IN point must be set sufficiently in advance of the desired scene. Drawing time varies according to the type of drawn graphic and the number of drawings. As a rule of thumb, the drawing time is usually in the range of 10 to 30 frames.

÷If different graphics are recorded in adjacent frames, they may not be drawn on the screen during continuous play- back due to drawing speed constraints.

÷Operation will not be performed according to the setting during frame reverse or reverse playback.

Draw by dragging with the left button pressed.

DVD.

1.Move the cursor to the line you want to change and click the left button of the mouse.

2.Move the cursor to AUTO DISP and click the left button of the mouse.

Indicator display on the right edge of screen

A:Displayed at the same time as the disc playback, from the set start point through the set end point.

AS :The video becomes a still image at the set start point.

–A S :The video becomes a still image immediately be- fore the set start point.

No display :The set characters or pictures are not displayed.

ENTER

Pressing in this section starts drawing.

S :The video becomes the still image at the set start

point but objects are not displayed.

ENTER

Press on the remote control unit to start pic-

ture drawing.

✽:The ✽ mark is displayed on the top right of the

screen during playback.

ENTER

Pressing in this section starts drawing.

✽S :The video becomes a still image, in which only the

✽mark is displayed, at the set start point.

	point.	ENTER	Advanced
		on the remote control unit to start pic-
	Press
	ture drawing.
Meaning of displayed symbols
“S”	stands for “Still image” and plays a still image at the IN		Operations
“A”	stands for “Auto display”, which displays drawing in the

	screen set with AUTO DISP.
“✽”	displays only the ✽ marking.

“–” displays a still image immediately before the start of the IN point.

DVD.

Pencil tool/freehand drawing

Click the right button of the mouse in the video blackboard input screen to turn the pointer into the pencil tool. Freehand drawing is possible by holding the mouse’s left button.

Clicking the right button again displays the Blackboard screen.

To change the color or line width, select COLR or the tool

on the Blackboard screen. (See “Drawing Tools” on page 77.)

NOTE:

÷Pictures can be drawn using the pencil tool but they can- not be saved later.

Indicator on the top of right