Sony CX-ZR525 manual Basic Operations, Loading Discs, Playing Discs

BASIC	OPERATIONS
DISC	DISC
	DIRECT
DIRECT
	PLAY
PLAY
DISC	RANDOMI
CHANGE	REPEAT
AOPEN/	EDITI
CLOSE
	CHECK
CD	0-9,+1 o
b	SHIFT
II
■
*,W

LOADING DISCS

Press the CD button, then press the A OPEN/ CLOSE button to open the disc compartment. Load disc(s) with the label side up.

To load one or two discs, place the discs(s) on tray(s) in the direction of the arrows as illustrated.

I

+{	,::;	,	.-,		‘\
			(..	,
‘\ -. ..		.“			/’
	----		‘\ . . -----	. ,

To load three to five discs, press the DISC CHANGE button to rotate the trays after placing two discs. Place the next disc on the empty tray. Each time the DISC CHANGE button is pressed, the trays rotate and one disc can be placed.

After placing the disc, press the A OPEN/CLOSE button to close the disc compartment.

The display shows the information of the disc to be played.

Total number of tracks Total playing time

Tray number of the disc to be played

/

PLAYING DISCS

Load discs,

To play all discs in the disc compartment, press the

-button.

All discs are played once.

Elapsed playing time

I

Number of track being played

To play one disc only, press one of the DISC DIRECT PLAY buttons.

The disc with the selected tray number is played once.

Only the selected disc tray number is surrounded.

To select with remote control

Press the DISC DIRECT PLAY 1, 2 or 3 button to select disc tray 1, 2 or 3. To select disc tray 4 or 5, press DISC DIRECT PLAY 4 or 5 button while pressing the SHIFT button,

To stop play, press the ■ button.

To pause play, press the 1I button. To resume play, press again.

To search for a particular point during playback, keep the

+or - button pressed and release the button at the desired

point.

To skip to the beginning of a track during playback, press

the 44 or - button repeatedly.

To remove discs, press the A OPEN/CLOSE button.

You can only remove the two discs that face you. When the disc to be removed does not face you, press the DISC CHANGE button repeatedly.

Selecting a track with the remote control

1 Press one of the DISC DIRECT PLAY buttons to select a disc.

To select disc 4 or 5, press DISC DIRECT PLAY 4 or 5 button while pressing the SHIFT button.

2 Press the numeric buttons and the +1 O button to select a track.

Example:

To select the 25th track, press the +1 O, +1 O and 5 buttons. To select the 10th track, press the +1 O and O buttons.

The selected track starts to play and continues to the end of that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without

interrupting play.

1 Pre& t~e”DISC CHANGE button. Two discs can be replaced,

2Remove the discs and replace with other discs.

To replace the other two discs, press the DISC CHANGE button again.

3Press the 4 OPEN/CLOSE button to close the disc compartment.

9 ENGLISH