Sony KP 61V75 Setting Caption Operating video, Equipment, Setting the manufacturer’s code

Setting Caption	Operating video
Vision (CAPTION VISION)	equipment

Some programs are broadcast with Caption Vision. To display Caption Vision, select either CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, or TEXT4 from the menu. CC1, CC2, CC3, or CC4 shows you on-screen version of the dialogue or sound effects of a program. (The mode should be set to CC1 for most programs.) TEXT1, TEXT2, TEXT3, or TEXT4 shows you on-screen information presented using either half or the whole screen. It is not usually related to the program.

7 8 9

0

V

v

MENU

1	Press MENU.
2	Press Vor vto select CC , and press .

	CAPTION VISION
	CC 1
	CC 2
	CC 3
	CC 4
	TEXT 1
	TEXT 2
	TEXT 3
CC	TEXT 4
	MENU

Use Exit MENU

3 Press Vor vto select the caption type, and press .

	CAPTION VISION
	CC 1
	CC 2
	CC 3
	CC 4
	TEXT 1
	TEXT 2
	TEXT 3
CC	TEXT 4
	MENU

Use Exit MENU

4 Press MENU to return to the original screen.

To display Caption Vision

Press DISPLAY. (See page 27 for details.)

Notes

•Poor reception of TV programs can cause errors in Caption Vision and XDS.

Captions may appear with a white box or other errors instead of a certain word.

•XDS, Caption Vision, and the status display cannot be used at the same time.

•For details on XDS, see page 27.

You can use the supplied remote control to operate Sony or non-Sony video equipment that has an infrared remote sensor. For this operation, set the manufacturer’s code number.

Setting the manufacturer’s code

VTR/DVD (FUNCTION)

1 2 3

4 5 6 0 – 9 buttons

7 8 9

0 ENTER

CODE SET

Press the CODE SET, VTR/DVD (FUNCTION), and 0 – 9 buttons to enter the manufacturer’s code number (see the chart on page 43), then press

ENTER.

For example, to operate a Sony 8 mm VCR, press CODE SET, VTR/DVD (FUNCTION), 3, 0, 2, and ENTER.

FUNCTION			ENTER
CODE SET VTR/DVD	3	0
			2

42-EN Operations