Controlling the BDP100, Select the source key first

Controlling the BDP100

The CR104 is a sophisticated ‘universal’ remote control that can control up to eight devices – including the BDP100. As it’s a ‘learning’ remote, it can copy almost any function from an existing single-device remote. You can also program the CR104 to issue a sequence of commands (‘macros’) from a single button press.

Select the source key first

Remember to select a source key before pressing command buttons – commands vary depending on the source selected.

To operate the BDP100 from the remote, first press the BD source button.

SAT AV TUN

AMP PVR VCR CD

DISP (display)

Press to cycle through the front panel display’s brightness options (dim to bright, off).

Source selection and handset configuration

BD	BD input/BD controls
SAT	Satellite decoder input/SAT controls
av	Television (sound) input/AV controls
tun	Radio tuner input/TUN controls
amp	Arcam amplifier
pvr	Personal Video Recorder input/controls
vcr	Video Cassette Recorder input/controls
cD	CD player input/CD controls

Press the relevant button once to select input and reconfigure the handset.

Press and hold the button until the power LED blinks once if you wish to reconfigure the handset without changing the input.

Navigation buttons

Arrow buttons allow navigation around the settings menus on the BDP100 and disc menus.

Confirm a selection by pressing OK.

MODE

This button activates the Picture-in-Picture Secondary Video function, where available.

MUTE

Press once to mute an Arcam amplifier. Press again (or use +/– volume) to un-mute.

VOLUME +/–

Adjusts the volume of a compatible amplifier.

OPEN

Opens and closes the disc tray

SETUP

Press setup to access the system settings menu.

DISP		T	RND
DISP			RND
SHIFT	STATUS		iPOD
SAT		AV
BD			TUN
PVR		VCR	CD
AMP			CD

MODE

RTN

SRCH

SETUP TITLE AUDIO SUBT

23425

CR104

On/Stand-by

This allows the BDP100 to be put into and taken out of stand-by remotely.

Numeric keys

Used for data entry. Also gives direct access to individual tracks on audio CDs.

RND

Toggles random (‘shuffle’) play of chapters/tracks on and off.

Press SHIFT followed by rnd to cycle through repeat play options (chapter, title, disc, etc.).

STATUS

Toggles the disc information display.

Press shift followed by status to activate or deactivate 24p mode (supported discs and TVs only).

Activates the BD ‘popup’ menu or the DVD disc menu.

RTN

Navigates to the previous menu.

Press to skip backwards to the previous track(0) or forwards to the next track (/).

Playback control

Pause (;), Play (4) and Stop (<). SHIFT+Pause activates slow playback.

Advanced controls

These buttons are described on the next page.

E-12