Arcam BDP100 Analogue audio output, 12V trigger input, Power inlet, Coaxial digital output, RS232

Analogue audio output

Connect these to your amplifier’s CD (or other line-level) input using suitable high quality interconnect cables. Ensure that the left and right audio outputs from the BD player are connected to the same left and right inputs on your amplifier.

12V trigger input

This socket allows the BDP100 to be switched in and out of stand-by mode by an amplifier (or another item of AV equipment) with a 12V TrIg out function. See page E-4.

Power inlet

Connect the correct mains cable here.

Coaxial digital output

Use this socket if you are using an AV receiver with a coaxial digital input. Connect to the digital input using a suitable 75Ω screened cable.

CAUTION: Never connect the digital output socket to a conventional audio input.

Composite video output

Connect this output to your display if the display does not support any other connection types.

USB connection

Insert USB flash memory devices here. USB memory can be used to save downloaded content. The BDP100 can also play certain digital files stored on USB memory drives (see page E-8).

English

RS232

This connection allows for remote control from a third-party home automation system or computer.

See page E-4 for more information.

Remote in

This allows remote-control signals to be received by the BDP100 if the remote sensor is covered (or otherwise not ‘visible’ to the remote-control).

See page E-4 for more information.

Optical digital output

Use this socket if you are using an AV receiver with an optical digital audio input.

Zone 2 audio output

Use this analogue output to provide audio for use in your AV receiver’s Zone 2. It can also be used to connect a recording device or headphone amplifier.

Component video output

If your display does not support HDMI but has a component input, connect it to this video output.

Network connection

Connect this socket to a port on your network router using an Ethernet patch cable (see page E-9). An internet connection enables interactive content for BD-Live discs (for setup details see “Network” on page E-22).

HDMI digital video output

Connect this output to your display or AV receiver if available for the best digital video and audio connection (see. page E-7 for details).

E-5