RCA RCU1000B warranty Code Search

Page 10

RCU1000B_IB.qxd 10/9/01 11:09 AM Page 10

Code Search

If you can’t find the code or your brand of product in the code list, you can search the entire Code Library for a particular device that may not be listed in the code list or is listed under a different manufacturer.

1.Manually turn on the device to be controlled (TV, VCR, SAT, etc.).

2.Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” Release the SETUP key.

3.Press and release SETUP or DOWN (▼) key once. LCD displays “Code SearchÉ.Mode?”

4.Press and release desired device key (TV, VCR, SAT, etc.). For AUX, press and release AUX key followed by desired device key that you want to make the AUX key become.

NOTE: If you do not press a device key after pressing AUX then AUX will be a Cable device.

OR

5.The LCD displays “Code Search....Key?” Press CH +/- or ON•OFF key repeatedly until the device to be con- trolled responds to the command. Press OK in the LCD to save the code.

NOTE: • After the first search keypress “Searching” and the current device and code is displayed in the LCD.

•If you accidentally overshoot the code that responded, you can go back by pressing the CH - to backtrack through the library until the device changes channel. Pressing CH + changes the direction to forward again. Press and release the OK key to save the code.

•If you reach the end of the library before pressing OK, the LCD shows “Search End” for two seconds and returns to “CodeSearchÉ.Mode?”. No changes are made.

OR

6.After pressing OK in step 5, the LCD displays

“CodeSearchÉ.Mode?”. Press EXIT on the LCD. Code Search Method entry is now complete.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Touchscreen Table Of Contents To install the batteries Battery InstallationRCU1000B Glossary Of Terms LCDTvvcr Setup Button To delete stored learned commands under a device To search for a code instead of using the code library listTo learn a command Quick Reference GuideTo exit setup while in setup mode To delete all stored learned commandsTo set a timer event To program a macroTo set the LCD on time Direct Code EntryTo set the light on time Code Search Code Identification Code Search NotesAuto Search TV Code List 003, 004, 009, 022VCR Code List WardsDVD Code List DVDSatellite Code List Cable Code ListAudio Component Code List Audio Receiver TunerKey Label Mode Setting Up An Event Timer Learn IR Mode Deleting An Event TimerTips On Learning To Learn Commands Learned Key Reference To Delete a Stored Learned Command To Delete ALL Stored Learned CommandsDisplays PressDigit For Delay? To Program a MacroExit Setup Reset AllTo Delete a Macro Setting More Options To Set The Time and Day for Normal LCD DisplayTo Set Keypress Beep on or OFF To Set LCD Light On-Time VCR Record RCA All Power Off FeatureVCR/DVD Punch-Through General NotesLimited 90 Day Warranty TroubleshootingHelpline Inside Card RCU1000B Product Registration Card
Top Page Image Contents