![](/images/new-backgrounds/1215196/21519633x1.webp)
RCU1000B_IB.qxd 10/9/01 11:09 AM Page 17
Key Label Mode
The RCU1000B remote allows you to customize the individual key pad labels as desired. This function is recommended for when you have finished programming all your devices and you have specific keys that you would like to
NOTE: The 9 device keys cannot be set with “key frames” only.
You can also hide the key completely (except TV and VCR keys).
Any required device key label change must be the first change made within the routine.
1.Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” Release the SETUP key.
2.Press and release SETUP key repeatedly until the LCD displays “Key LabelsÉ.Mode?”
3.Press and release desired device key (TV, VCR, SAT, etc.) to display the keys for that screen. If the current device key label is to be changed, make the change prior to pressing any other LCD key. You can now press any of the remaining LCD keys within that device to select the label desired for that key. Each time you press a key a different label for that key is displayed.
NOTE: To reset the device’s key labels back to their Default settings, press and hold that device key for 3 seconds. A reset to a Devices Default labels will automatically be saved and operation returned to the “Key LabelsÉ. Mode?” screen.
For Example:
Master Key Label
Key Options
4. To save the label selections for that device screen, |
|
press another device key or press the SETUP key. |
|
Pressing SETUP exits out of the “change labels | OR |
routine.” Preprogrammed and Learned codes are not |
|
affected by these changes. Macro’s and Timers still |
|
include any key “hidden” by the above method. |
|
display returns to “Key LabelsÉ. Mode?” screen. |
|
The screen to the right shows ALL the possible labels, although only the options for the Device you selected are shown at any one time.
17