RCA RCU1000B warranty Setting Up An Event Timer

Page 18

RCU1000B_IB.qxd 10/9/01 11:09 AM Page 18

Setting Up An Event Timer

The event timer lets you program the remote to turn on your TV, VCR, etc., at a time that you tell it to do so. Up to 4 timer events can be set. The event you program will happen only once, on the same day that you program the remote (you cannot program what day you want it to happen). After setting up your timer event be sure to leave the remote pointed at the device(s) you have programmed it to control.

1.Press and hold the SETUP key until the LCD

displays “Code SetupÉ.Mode?” and the LED remains ....

on. Release the SETUP key.

2. Press the SETUP key repeatedly until “Setup a Timer?” appears on the LCD. Press and release OK on the LCD.

“TimerX (1, 2, 3 or 4)….Mode?” is displayed. Press and release desired device key (TV, VCR, AUX, etc.).

4. “TimerXÉ.Key?” is displayed. Press the key you want to program to activate after a certain time delay.

5. “Set HoursÉ.DAY HH:MM” is displayed. The hour digits HH are flashing. (The DAY is not used for Timer set- tings). Press and release the Up (▲) or Down (▼) key to select the hour. Press and release OK on the LCD.

6. Minutes digits MM are now flashing. Press and release the Up (▲) or Down (▼) key to select the minute. Press and release OK on the LCD.

7. Press and release OK to confirm and save.

8. Once the first timer event is set the LCD displays “TimerX (1, 2, 3 or 4)….Mode?” for setting next Timer Event. If you want to set another Timer Event, repeat from step 4. If you don’t want to set any more Timer Events press SETUP repeatedly to exit.

9.Timer setting is now complete and confirmed by the symbol (T) displayed above the clock in normal operation, to remind you that you have a Timer Event set.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Touchscreen Table Of Contents Battery Installation To install the batteriesRCU1000B Glossary Of Terms LCDTvvcr Setup Button To delete stored learned commands under a device To search for a code instead of using the code library listTo learn a command Quick Reference GuideTo exit setup while in setup mode To delete all stored learned commandsTo set a timer event To program a macroDirect Code Entry To set the LCD on timeTo set the light on time Code Search Code Search Notes Code IdentificationAuto Search TV Code List 003, 004, 009, 022VCR Code List WardsDVD Code List DVDSatellite Code List Cable Code ListAudio Component Code List Audio Receiver TunerKey Label Mode Setting Up An Event Timer Deleting An Event Timer Learn IR ModeTips On Learning To Learn Commands Learned Key Reference To Delete a Stored Learned Command To Delete ALL Stored Learned CommandsDisplays PressDigit For Delay? To Program a MacroReset All Exit SetupTo Delete a Macro Setting More Options To Set The Time and Day for Normal LCD DisplayTo Set Keypress Beep on or OFF To Set LCD Light On-Time VCR Record RCA All Power Off FeatureVCR/DVD Punch-Through General NotesTroubleshooting Limited 90 Day WarrantyHelpline Inside Card RCU1000B Product Registration Card
Top Page Image Contents