RCA RCU1000B Quick Reference Guide, To search for a code instead of using the code library list

Page 7

RCU1000B_IB.qxd 10/9/01 11:09 AM Page 7

Quick Reference Guide

To program your remote to control your TV or VCR, or Cable, etc:

Enter Setup by pressing and holding the SETUP key, then release...

Press TV, or VCR, or Cable etc...

Enter 3 digit code for your brand of TV, or VCR, or Cable etc. (from the code list)...

(see pages 12-16)

Press and release EXIT then OK to return to normal operation.

To search for a code (instead of using the code library list):

Turn on device (e.g TV)...

Enter Setup by pressing and holding the SETUP key, then release...

Press SETUP again...

Press TV, VCR or Cable...etc.

Press CH UP repeatedly until TV changes channel...

NOTE: Some devices do not have the CH+/- keys. In this case press the ON•OFF key on the LCD.

Press OK.

Press and release EXIT then OK to return to normal operation.

To find out the code you have set for a particular device (TV, VCR, etc): Press that device key. The code set is displayed at the top of the LCD.

To turn on your device:

Press device key...

Press the ON•OFF key...

To set the time and day:

Enter Setup by pressing and holding the SETUP key, then release...

Press SETUP repeatedly until Set More Options? is displayed...

Press and release OK...

Press and release OK to enter into set time...

Press and release LEFT or RIGHT ARROW keys to select 12Hr or 24Hr time format...

Press and release OK...

Press and release the UP or DOWN key to select the DAY...

Press and release OK...

Press and release the UP or DOWN key to select the HOUR...

Press and release OK...

Press and release the UP or DOWN key to select the MINUTE...

Press and release OK key twice...

Press and release EXIT then OK to return to normal operation.

To learn a command:

Enter Setup by pressing and holding the SETUP key, then release...

Press the LEARN key at the top of the LCD screen...

Press and release device key (TV, VCR, etc.)...

Learn IR Key? is displayed. Press and release the RCU1000B key you want to “teach” a code

to... Learning Please Wait is displayed...

Press and hold the original remote key you want to transfer to the RCU1000B until

Learn IR Key? appears...

Release the original remote key...

Repeat the above for other buttons to be learned...

Press and release SETUP key when all desired original remote commands have been learned..

Press and release EXIT then OK to return to normal operation.

To delete stored learned commands under a device:

Enter Setup by pressing and holding the SETUP key, then release...

Press SETUP repeatedly until Delete IR Mode? appears...

Press and release desired device key (TV, VCR, etc.). Confirm to Delete? is displayed...

Press and release OK to delete all the learned keys.

Press and release EXIT then OK to return to normal operation.

7

Image 7
Contents Touchscreen Table Of Contents To install the batteries Battery InstallationRCU1000B LCD Glossary Of TermsTvvcr Setup Button Quick Reference Guide To search for a code instead of using the code library listTo learn a command To delete stored learned commands under a deviceTo program a macro To delete all stored learned commandsTo set a timer event To exit setup while in setup modeTo set the LCD on time Direct Code EntryTo set the light on time Code Search Code Identification Code Search NotesAuto Search 003, 004, 009, 022 TV Code ListWards VCR Code ListDVD DVD Code ListCable Code List Satellite Code ListAudio Receiver Tuner Audio Component Code ListKey Label Mode Setting Up An Event Timer Learn IR Mode Deleting An Event TimerTips On Learning To Learn Commands Learned Key Reference To Delete ALL Stored Learned Commands To Delete a Stored Learned CommandTo Program a Macro Displays PressDigit For Delay?Exit Setup Reset AllTo Delete a Macro To Set The Time and Day for Normal LCD Display Setting More OptionsTo Set Keypress Beep on or OFF To Set LCD Light On-Time General Notes RCA All Power Off FeatureVCR/DVD Punch-Through VCR RecordLimited 90 Day Warranty TroubleshootingHelpline Inside Card RCU1000B Product Registration Card