RCA RCU1000B warranty Setting More Options, To Set The Time and Day for Normal LCD Display

Page 25

RCU1000B_IB.qxd 10/9/01 11:10 AM Page 25

Setting More Options

To Set The Time and Day for Normal LCD Display

1.Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” and the LED remains on. Release the SETUP key.

2.Press the SETUP key repeatedly until “Set more Options?” is displayed.

3.Press and release the OK on the LCD.

4.“Set Time?ÉDAY HH:MM” with current day (DAY) and time (HH:MM) now appears in LCD. Press and release the OK on the LCD.

5.“Set FormatÉ.12Hr<>24Hr” now appears in the LCD. A solid arrow indicates the current setting. Press and release OK on the LCD. Press and release the LEFT or RIGHT ARROW keys to select 12Hr or 24Hr time format.

6.“Set DayÉ.DAY HH:MM” now appears in LCD with DAY flashing.

7.Press and release or press and hold the UP (▲) or DOWN (▼) key to select the DAY. Press and release OK on the LCD once you have reached the correct day.

8.Hours digits HH will now be flashing. Press and release or press and hold the UP (▲) or DOWN (▼) key to select the hour. Press and release OK on the LCD once you have reached the correct hour.

NOTE: To adjust the AM/PM designation, scroll through the hour settings.

9.Minutes digits MM will now be flashing. Press and release or press and hold the UP (▲) or DOWN (▼) key to select the minute. Press and release OK on the LCD once you have reached the correct minute setting.

10.Upon completion of setting the day, time and hour format, the LCD displays “Set more Options”.

11.Press and release OK to confirm and save.

12.Press EXIT on the LCD. Time and Day setting is now complete.

OR

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Touchscreen Table Of Contents To install the batteries Battery InstallationRCU1000B LCD Glossary Of TermsTvvcr Setup Button To learn a command To search for a code instead of using the code library listTo delete stored learned commands under a device Quick Reference GuideTo set a timer event To delete all stored learned commandsTo exit setup while in setup mode To program a macroTo set the LCD on time Direct Code EntryTo set the light on time Code Search Code Identification Code Search NotesAuto Search 003, 004, 009, 022 TV Code ListWards VCR Code ListDVD DVD Code ListCable Code List Satellite Code ListAudio Receiver Tuner Audio Component Code ListKey Label Mode Setting Up An Event Timer Learn IR Mode Deleting An Event TimerTips On Learning To Learn Commands Learned Key Reference To Delete ALL Stored Learned Commands To Delete a Stored Learned CommandTo Program a Macro Displays PressDigit For Delay?Exit Setup Reset AllTo Delete a Macro To Set The Time and Day for Normal LCD Display Setting More OptionsTo Set Keypress Beep on or OFF To Set LCD Light On-Time VCR/DVD Punch-Through RCA All Power Off FeatureVCR Record General NotesLimited 90 Day Warranty TroubleshootingHelpline Inside Card RCU1000B Product Registration Card
Top Page Image Contents