RCA RCU1000B warranty Direct Code Entry, To set the LCD on time, To set the light on time

Page 9

RCU1000B_IB.qxd 10/9/01 11:09 AM Page 9

Quick Reference Guide continued

To set the LCD on time:

Enter Setup by pressing and holding the SETUP key, then release… Press SETUP repeatedly until Set More Options? is displayed….

Press and release OK…

Press the UP or DOWN key until Set LCD On Time? appears….

Press the release OK…

Press the UP or DOWN key to change the on time of the LCD screen…

NOTE: The time intervals that can be set are in 10 second increments.

Press and release OK...

Press and release OK to confirm...

Press and release EXIT then OK to return to normal operation.

To set the light on time:

Enter Setup by pressing and holding the SETUP key, then release… Press SETUP repeatedly until Set More Options? is displayed….

Press and release OK…

Press the UP or DOWN key until Set Light On Time? appears….

Press the release OK…

Press the UP or DOWN key to change the Light on time…

NOTE: The time intervals that can be set are in 10 second increments.

Press and release OK...

Press and release OK to confirm...

Press and release EXIT then OK to return to normal operation.

Direct Code Entry

1. Manually turn on device to be controlled.

2. Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode.” Release the SETUP key.

3. Press and release desired device key (TV, VCR, SAT, etc.) on the LCD. The LCD displays the current device and code. For AUX, press and release AUX key followed by desired device key that you want to make the AUX key become.

NOTE: If you do not press a device key after pressing AUX then AUX will be a Cable device.

4. Enter the 3 digit code from the Code Tables (pages 12-16)for your brand of TV, VCR, etc. depending on what device key you pressed above (TV, VCR, etc.). For a valid code the LCD displays ”Code Save Success” followed by “Code SetupÉ.Mode?”

NOTE: For an incorrect Code entry, the LCD displays “Invalid Entry Made” for two seconds before displaying “Code SetupÉ.Mode?”and no changes are made.

5. If a valid code has been entered, press EXIT on the LCD. Direct Code entry is now complete.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Touchscreen Table Of Contents Battery Installation To install the batteriesRCU1000B LCD Glossary Of TermsTvvcr Setup Button To learn a command To search for a code instead of using the code library listTo delete stored learned commands under a device Quick Reference GuideTo set a timer event To delete all stored learned commandsTo exit setup while in setup mode To program a macroDirect Code Entry To set the LCD on timeTo set the light on time Code Search Code Search Notes Code IdentificationAuto Search 003, 004, 009, 022 TV Code ListWards VCR Code ListDVD DVD Code ListCable Code List Satellite Code ListAudio Receiver Tuner Audio Component Code ListKey Label Mode Setting Up An Event Timer Deleting An Event Timer Learn IR ModeTips On Learning To Learn Commands Learned Key Reference To Delete ALL Stored Learned Commands To Delete a Stored Learned CommandTo Program a Macro Displays PressDigit For Delay?Reset All Exit SetupTo Delete a Macro To Set The Time and Day for Normal LCD Display Setting More OptionsTo Set Keypress Beep on or OFF To Set LCD Light On-Time VCR/DVD Punch-Through RCA All Power Off FeatureVCR Record General NotesTroubleshooting Limited 90 Day WarrantyHelpline Inside Card RCU1000B Product Registration Card
Top Page Image Contents