RCA RCU1000B warranty To Set Keypress Beep on or OFF

Page 26

RCU1000B_IB.qxd 10/9/01 11:10 AM Page 26

Setting More Options continued

To Set Keypress Beep ON or OFF

When any key is pressed, an audible beep can be heard to acknowledge the keypress. This beep can be turned on or off. The default state is enabled (ON).

1.Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” and the LED remains on. Release the SETUP key.

2.Press the SETUP key repeatedly until “Set more Options” appears. Press and release the OK on the LCD. “Set Time?ÉDAY HH:MM” now appears in the LCD.

3.Press the SETUP key repeatedly until “Set Beep?É On<>Off” is displayed. Press and release OK on the

LCD

4.“Set Beep?ÉOn<>Off” remains in the display with a solid arrow indicating the current setting. Press and release the LEFT or RIGHT ARROW key to select ON or OFF. Press and release OK twice to save beep state change.

5.LCD displays “Set more Options” and beep change is now complete. Press EXIT on the LCD.

To Set LCD On-Time

OR

x2

The LCD remains on for a user selectable time period (10, 20, 30,…90 seconds). The Power-on default is 10 seconds from last keypress. You are not allowed to set an LCD on timeout period that does not equal or exceed the Backlight on time.

1. Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” and the LED remains on. Release the SETUP key.

2. Press the SETUP key repeatedly until “Set more Options” appears. Press and release OK on the LCD. “Set Time?ÉDAY HH:MM” now appears in the LCD.

3. Press the SETUP key repeatedly until “Set LCD On Time?” appears in the display. Press and release OK on the LCD.

4. The LCD displays “LCD On for X0 secs” where “X” is

the “tens digit” of the current on time. The “0” is

 

 

 

 

 

 

 

 

 

 

 

 

fixed and you can only increment the 10’s digit for

 

 

 

 

 

 

10, 20, 30, …90 seconds on time. Press and release or

 

 

 

 

 

 

press and hold the UP (▲) or DOWN (▼) key to select

 

 

 

 

 

x2

desired on time. Press and release OK twice on the

 

 

 

 

 

 

 

 

 

 

 

LCD to save your settings.

 

 

 

 

 

 

 

5.The LCD displays “Set more Options”. Press EXIT on the LCD.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Touchscreen Table Of Contents RCU1000B Battery InstallationTo install the batteries Glossary Of Terms LCDTvvcr Setup Button To delete stored learned commands under a device To search for a code instead of using the code library listTo learn a command Quick Reference GuideTo exit setup while in setup mode To delete all stored learned commandsTo set a timer event To program a macroTo set the light on time Direct Code EntryTo set the LCD on time Code Search Auto Search Code Search NotesCode Identification TV Code List 003, 004, 009, 022VCR Code List WardsDVD Code List DVDSatellite Code List Cable Code ListAudio Component Code List Audio Receiver TunerKey Label Mode Setting Up An Event Timer Tips On Learning Deleting An Event TimerLearn IR Mode To Learn Commands Learned Key Reference To Delete a Stored Learned Command To Delete ALL Stored Learned CommandsDisplays PressDigit For Delay? To Program a MacroTo Delete a Macro Reset AllExit Setup Setting More Options To Set The Time and Day for Normal LCD DisplayTo Set Keypress Beep on or OFF To Set LCD Light On-Time VCR Record RCA All Power Off FeatureVCR/DVD Punch-Through General NotesHelpline TroubleshootingLimited 90 Day Warranty Inside Card RCU1000B Product Registration Card
Top Page Image Contents