RCA RCU1000B warranty To Learn Commands

Page 20

RCU1000B_IB.qxd 10/9/01 11:09 AM Page 20

To Learn Commands

Gather all the remotes that you want to learn and have them all lined up on a flat surface before going into Learn Setup Mode. Place the RCU1000B in front of your existing remotes so that the front of your existing remotes point at the back of the RCU1000B. Make sure that you keep about 2 inches between the remote you are learning from and the RCU1000B.

2 inches

1.Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” and the LED remains on. Release the SETUP key.

2.When you press the LEARN key at this point the LCD displays “Learn IRÉ.Mode?”.

3.Press and release the desired device key (TV, VCR, SAT, AUX, etc.) “Learn IRÉ.Key?” is displayed.

4.To teach a key on the RCU1000B, press and release the LCD key, or the Quick key, that you wish to program.

NOTE: You cannot learn any commands under the Learn, Macro, Setup, or any device key.

5.“Learning...Please Wait” is displayed. Press and hold the original remote key you want to transfer to the RCU1000B until “Success” followed by “Learn IRÉ.Key?” appears in the display (this process can take 2 or 3 seconds to complete). Release the original remote key. If there is a problem with learning the LCD shows “Learn....Error” for 3 seconds but still remains in the Learning Setup.

6.Repeat Steps 4 and 5 for other keys to be learned.

NOTE: To manually record your learned keys for future reference refer to page 21.

Press Any Key Except...

7.Press and release the SETUP key when all desired original remote commands have been learned.The LCD displays “LearningÉCompleted” followed by “Learn IRÉ.Mode?”.

8.Press EXIT on the LCD. Learning is now complete.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Touchscreen Table Of Contents RCU1000B Battery InstallationTo install the batteries Glossary Of Terms LCDTvvcr Setup Button To search for a code instead of using the code library list To learn a commandTo delete stored learned commands under a device Quick Reference GuideTo delete all stored learned commands To set a timer eventTo exit setup while in setup mode To program a macroTo set the light on time Direct Code EntryTo set the LCD on time Code Search Auto Search Code Search NotesCode Identification TV Code List 003, 004, 009, 022VCR Code List WardsDVD Code List DVDSatellite Code List Cable Code ListAudio Component Code List Audio Receiver TunerKey Label Mode Setting Up An Event Timer Tips On Learning Deleting An Event TimerLearn IR Mode To Learn Commands Learned Key Reference To Delete a Stored Learned Command To Delete ALL Stored Learned CommandsDisplays PressDigit For Delay? To Program a MacroTo Delete a Macro Reset AllExit Setup Setting More Options To Set The Time and Day for Normal LCD DisplayTo Set Keypress Beep on or OFF To Set LCD Light On-Time RCA All Power Off Feature VCR/DVD Punch-ThroughVCR Record General NotesHelpline TroubleshootingLimited 90 Day Warranty Inside Card RCU1000B Product Registration Card
Top Page Image Contents