RCA RCU1000B warranty To Set LCD Light On-Time

Page 27

RCU1000B_IB.qxd 10/9/01 11:10 AM Page 27

Setting More Options continued

To Set LCD Light On-Time

Backlighting is generated by an Electroluminescent (EL) panel which gives a blue light that lets you see the LCD in the dark. A light sensor circuit automatically enables the backlight- ing. Backlighting remains on for a user selectable time period (00, 10, 20,…90 seconds). The Power-on default is 10 seconds. The Backlight on timeout period is not allowed to exceed the LCD on time. To set the Backlight On time:

1. Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” and the LED remains on. Release the SETUP key.

2.Press the SETUP key repeatedly until “Set more Options” appears. Press and release the OK on the

LCD. “Set Time?ÉDAY HH:MM” now appears in the LCD.

3. Press the SETUP key repeatedly until “Set Light On Time?” appears in the display. Press and release OK on the LCD.

4. The LCD displays “Light On for X0 secs” where “X” is

 

the “tens digit” of the current on time. The “0” is

x2

fixed and you can only increment the 10’s digit for

00, 10, 20, …90 seconds on time. Press and release or press and hold the UP (▲) or DOWN (▼) key to select desired on time. Press and release OK twice on the LCD. to save your settings.

5. The LCD displays “Set more Options”. Press EXIT on the LCD.

To Set Volume TV or Audio (Punch-Through)

This feature allows you to choose between which TV or AUDIO volume function will be your master volume punch-through source. Volume punch-through allows you to set you main audio source to control your volume up and down while in different device modes of your remote. e.g. Once the Volume TV or Audio is set, you can have your TV or Tuner volume and mute keys work while you are in Cable, DVD, SAT and VCR modes.

1.Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” and the LED remains on. Release the SETUP key.

2.Press the SETUP key repeatedly until “Set more Options” appears. Press and release the OK on the LCD. “Set Time?ÉDAY HH:MM” appears in the LCD.

3.Press the SETUP key repeatedly until “Set VolumeÉ.TV<>Audio?” appears in the display. Press and release OK.

4.“Set VolumeÉ.TV<>Audio?” remains in the display with a solid arrow indicating the current setting. Press and release the LEFT or RIGHT ARROW keys to select TV or Audio. Press and release OK to save the selec- tion.

OR

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Touchscreen Table Of Contents Battery Installation To install the batteriesRCU1000B LCD Glossary Of TermsTvvcr Setup Button Quick Reference Guide To search for a code instead of using the code library listTo learn a command To delete stored learned commands under a deviceTo program a macro To delete all stored learned commandsTo set a timer event To exit setup while in setup modeDirect Code Entry To set the LCD on timeTo set the light on time Code Search Code Search Notes Code IdentificationAuto Search 003, 004, 009, 022 TV Code ListWards VCR Code ListDVD DVD Code ListCable Code List Satellite Code ListAudio Receiver Tuner Audio Component Code ListKey Label Mode Setting Up An Event Timer Deleting An Event Timer Learn IR ModeTips On Learning To Learn Commands Learned Key Reference To Delete ALL Stored Learned Commands To Delete a Stored Learned CommandTo Program a Macro Displays PressDigit For Delay? Reset All Exit Setup To Delete a Macro To Set The Time and Day for Normal LCD Display Setting More OptionsTo Set Keypress Beep on or OFF To Set LCD Light On-Time General Notes RCA All Power Off FeatureVCR/DVD Punch-Through VCR RecordTroubleshooting Limited 90 Day WarrantyHelpline Inside Card RCU1000B Product Registration Card
Top Page Image Contents