Sony NSX-A707 manual For the rest 01 the tracks for Side a

5

3,7

4,5

3,7

In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape as the tracks are programmed.

Em

The programmed edit recording will not start from a point halfway in the tape, The tape must be recorded on from the beginning of either side.

6 Repeat	step	5 for the rest 01 the tracks for			side A.		-.
A track whose		playing time is longer than the remaining				time	~~ f
cannot	be programmed.
7 Press	CD	EDllT/CHECK	to	select side	B	and !$H!’
program the tracks for			side	B.			,;#:+
							‘,*:;

After confirming “El”on the display, repeat step 5.

Tape side B (reverse side)

8 Press the ● REC/REC MUTE button to start recording.

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.

To stop recording

Press ■ , Recording and CD play stop simultaneously,

To check the order of the programmed track numbers Before recording, press CD EDIT/UIECK to select sicle A or B,

and press U or - repeatedly.

Disc number Track number Program number

1 Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out from the unit.

2 Press CD and load the disc(s).

3 [Dress CD EDIT/cHEcK t~i~em

“EDIT”and “PRGM”are displayed.

o,When ‘[AI” is displayed, press CD EDIT/CHECK again.

4 Press numbered buttons on the remote control to designate the tape length.

“1Oto 99 minutes can be specified.

dIThe U, ~ or MULTI JOG are also available to designate the tape length,

Tape length Tape side A (front side)

Maximum recording time for side A

5lPress DISC DIRECT PLAY 1-3to select a disc.

Then, press numbered buttons O-9 and + 10 on the remote control to program a track.

lExample: To select the 10th track of disc 2, press DISC IDIRECT PLAY 2, then press +10 and O.

Remaining time	Programmed
on side A	tracks

Tape side	Programmed track
	numbers

To change the program of each side

Press CD EDIT/CHECK to select side A or B, and press ■ CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press ■ CLEAR twice so that “EDIT”disappears on the display.

m

Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

ENG,L/SH 20