Clifford 570.4X manual Status Screen Icons, Table below describes all the status screen icons

Page 11

Status Screen Icons

Status Screen

Icons

ALL

1

Text Field

The table below describes all the status screen icons.

Remote Start Siren StatusSystem Status

Icon Description

Armed: The system is Armed, the alarm is enabled.

Locked: The system is Locked in Valet, the alarm is disabled.

Disarmed: The system is Disarmed, the alarm is disabled.

Unlocked: The system is Unlocked in Valet, the alarm is dis- abled.

Siren is disabled for sensor triggers; remote is paged for all trig- gers (Sensor Silent Arm).

+ ALL

Siren is disabled for all triggers; remote is paged for all triggers

(Full Silent Arm).

 

Remote start is active, the engine is running.

Timer Start is On; Remote Start is On.

Note: When the icon is without an arrow head: Timer Start is

enabled: Remote Start is Off

8

© 2011 Directed Electronics. All rights reserved.

Image 11
Contents Page Congratulations What you get Important information Government Regulations and Safety informationYour Warranty Replacement remote controls Contents Page Page Getting Started Charging the remote controlAt a Glance Keys to using this manualCan be located through the table of contents Function button Responder LC 2-WayAt a Control CenterTable below describes all the status screen icons Status Screen IconsRemote Start Zone Status Feature menus Performing Commands Using your SystemCommands and Confirmations Fault Condition Alerts Responder LC Command tableDirected Electronics. All rights reserved Disarm Basic Commands Direct AccessArm Remote Start AUX/TrunkPress and release the button 1 time Advanced Commands LevelSilent Arm Silent DisarmPress and hold the button Runtime ResetIf set to display runtime Commands Temp RequestPress and release the button 2 times Sensor BypassRemote Valet Runtime Remaining Timer Startfirm and the Remote start status icons update Commands Press and release the button 3 times Sensor Silent ArmCar finder Smart Start Alarm ReportPress and release the button 4 times Full Silent ArmDefogger Button operation Access menu itemsResponder LC Configuration Navigating menus and optionsButton followed by Setup Remote menu Keypad LockMain Menu ModeRemote Start Info AlertTemp Unit Runtime AlertCar Screen ColorClock Set Sensor AdjustButton Beep System TypeMenu Pair RemotePower Off Demo modeSensor Silent Arm protection Alarm FeaturesNormal Arm Protection Emergency Override Full Silent Arm ProtectionSensor Warn-away Messages Full Trigger MessagesAlarm Report when disarming Trigger Zone Fault ReportNuisance Prevention NPC Alarm Report when requestedKey Takeover Remote Start FeaturesPit Stop Mode Advanced Start Remote Start Safe-lockDisabling Remote Start Smart Start operation Temperature ReportingTimer Start operation Start the engine and the text and tones play as an alert Manual Transmission Start MTS modeRemote Start Time-out Alert Turbo Timer Mode Remote Start Error Onetime Bypass Remote and System OperationsPassive Arming Auto Re-armingRapid Resume Valet ModePower Save Automatic Remote UpdatesNo Remote Output Feature not AvailableOut of Range Way Way Companion Remote ControlCar Select Using the 1 way companion remoteAccessing Commands Button Auto LockProgramming Remote Features menuTray while gently prying the tray Battery Information 1-WayRemote control housing Polarity, replace the old batterySystem Expansion Options Auxiliary Channels Driver door priority unlockingLow Battery Battery Information Responder LCBattery Life Battery Disposal Document Terminology Control Module Glossary of TermsPatent Information Government Regulations Remote ControlsControl Center SafetyManual Transmission Vehicles InstallationRemote Start Capable Operation of the Remote Start Module if the Vehicle Starts Water/Heat Resistance Upgrades and BatteriesInterference Limited lifetime consumer warranty Directed Electronics. All rights reserved