Responder LC Command table
Level | Direct Access | x 1 | x 2 | x 3 | x 4 |
|
| ||||
Button |
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 |
|
| ||||
| Arm/Lock | Silent Arm | Sensor | Sensor Silent | Full Silent |
| (Panic) |
| Bypass | Arm | Arm |
| Disarm/Unlock | Silent Disarm | Remote Valet | Car Finder |
|
| Remote Start | Runtime | Timer Start | Smart Start | Defogger |
|
| Reset |
|
|
|
A U X | Aux/Trunk | AUX 1 | AUX 2 | AUX 3 | AUX 4 |
Advance Level Change Car (3s), Enter programming (8s)
Temperature Check
Runtime Remaining
Alarm Report
Fault Condition Alerts
If, when performing a command, a condition exists that does not allow activation of an Alarm feature* or Remote Start feature**,
the NOT AVAILABLE or REMOTE START ERROR text and a fault tone will
play.
*Alarm feature not available when the system status is incorrect upon receiving the command. (Example: Sensor bypass com- mand is received when disarmed).
Refer to the notes included in the following command descriptions that address these faults or go to “Feature not Available” on page 42 for more details.
12 | © 2011 Directed Electronics. All rights reserved. |