Clifford 570.4X manual Operation of the Remote Start Module if the Vehicle Starts

Page 60

Before remote starting a manual transmission vehicle, be sure to:

ssLeave the vehicle in neutral and be sure no one is standing in front or behind the vehicle.

ssOnly remote start on a flat surface

ssHave the parking brake fully engaged

WARNING! It is the responsibility of the owner to ensure the parking/emer- gency brake properly functions. Failure to do so can result in personal injury or property damage. We recommend the owner have the parking / emergency brake system inspected and adjusted by a qualified automotive shop biannu- ally.

Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or death. (1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also have the neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation guide. If the vehicle starts in gear, cease remote start operation im- mediately and consult with the authorized Directed dealer to fix the problem.

After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN

Safety

© 2011 Directed Electronics. All rights reserved.

57

Image 60
Contents Page Congratulations What you get Government Regulations and Safety information Your Warranty Replacement remote controlsImportant information Contents Page Page Charging the remote control Getting StartedKeys to using this manual Can be located through the table of contentsAt a Glance Responder LC 2-Way Function buttonControl Center At aStatus Screen Icons Table below describes all the status screen iconsRemote Start Zone Status Feature menus Using your System Commands and ConfirmationsPerforming Commands Responder LC Command table Fault Condition AlertsDirected Electronics. All rights reserved Basic Commands Direct Access ArmDisarm AUX/Trunk Remote StartAdvanced Commands Level Silent ArmSilent Disarm Press and release the button 1 timeRuntime Reset If set to display runtime CommandsTemp Request Press and hold the buttonSensor Bypass Remote ValetPress and release the button 2 times Timer Start firm and the Remote start status icons update CommandsRuntime Remaining Sensor Silent Arm Car finderPress and release the button 3 times Alarm Report Smart StartFull Silent Arm DefoggerPress and release the button 4 times Access menu items Responder LC ConfigurationNavigating menus and options Button operationSetup Remote menu Keypad Lock Main MenuMode Button followed byAlert Remote Start InfoRuntime Alert CarScreen Color Temp UnitSensor Adjust Button BeepSystem Type Clock SetPair Remote MenuDemo mode Power OffAlarm Features Normal Arm ProtectionSensor Silent Arm protection Full Silent Arm Protection Sensor Warn-away MessagesFull Trigger Messages Emergency OverrideTrigger Zone Fault Report Alarm Report when disarmingAlarm Report when requested Nuisance Prevention NPCRemote Start Features Pit Stop ModeKey Takeover Remote Start Safe-lock Disabling Remote StartAdvanced Start Temperature Reporting Timer Start operationSmart Start operation Manual Transmission Start MTS mode Remote Start Time-out AlertStart the engine and the text and tones play as an alert Turbo Timer Mode Remote Start Error Remote and System Operations Passive ArmingAuto Re-arming Onetime BypassValet Mode Power SaveAutomatic Remote Updates Rapid ResumeFeature not Available Out of RangeNo Remote Output Way Companion Remote Control WayUsing the 1 way companion remote Accessing CommandsButton Auto Lock Car SelectRemote Features menu ProgrammingBattery Information 1-Way Remote control housingPolarity, replace the old battery Tray while gently prying the traySystem Expansion Options Driver door priority unlocking Auxiliary ChannelsBattery Information Responder LC Low BatteryBattery Life Battery Disposal Glossary of Terms Document Terminology Control ModulePatent Information Remote Controls Government RegulationsSafety Control CenterInstallation Remote Start CapableManual Transmission Vehicles Operation of the Remote Start Module if the Vehicle Starts Upgrades and Batteries InterferenceWater/Heat Resistance Limited lifetime consumer warranty Directed Electronics. All rights reserved