Clifford 570.4X manual Out of Range, No Remote Output, Feature not Available

Page 45

NOT AVAILABLE

Out of Range

Each time a command is performed the remote will expect a com- mand conﬁrmation from the system. If a command conﬁrmation is not received the out-of-range icon ( ) and a fault tone will play as an alert.

No Remote Output

Occasionally when a command is performed the remote may not generate a command conﬁrmation output or Out of Range output. This indicates that the system received the command but it was an incomplete command (e.g. Aux button pressed too short to activate the trunk release) or it was an illegal message (e.g. the command was corrupted due to local RF interference). These are temporary nor- mal functions of the system and remote, perform the command again within 10 seconds to return to normal operation.

Feature not Available

The message is a generic one which varies in cause and solution depending upon the command used:

Command	Cause	Reason/Solution
Runtime Reset	Remote Start is Off	Only available when Remote Start is On
Sensor Bypass	System is not armed	Only available when system is armed
Defroster	Remote Start is Off.	Only available when Remote Start is On.
	Not configured for	Only available when configured for
	this.	Defroster control.

42	© 2011 Directed Electronics. All rights reserved.

Image 45

Contents Page Congratulations What you get Government Regulations and Safety information Your Warranty Replacement remote controlsImportant information Contents Page Page Getting Started Charging the remote controlKeys to using this manual Can be located through the table of contentsAt a Glance Function button Responder LC 2-WayAt a Control CenterTable below describes all the status screen icons Status Screen IconsRemote Start Zone Status Feature menus Using your System Commands and ConﬁrmationsPerforming Commands Fault Condition Alerts Responder LC Command tableDirected Electronics. All rights reserved Basic Commands Direct Access ArmDisarm Remote Start AUX/TrunkSilent Arm Advanced Commands LevelSilent Disarm Press and release the button 1 timeIf set to display runtime Commands Runtime ResetTemp Request Press and hold the buttonSensor Bypass Remote ValetPress and release the button 2 times Timer Start ﬁrm and the Remote start status icons update CommandsRuntime Remaining Sensor Silent Arm Car ﬁnderPress and release the button 3 times Smart Start Alarm ReportFull Silent Arm DefoggerPress and release the button 4 times Responder LC Conﬁguration Access menu itemsNavigating menus and options Button operationMain Menu Setup Remote menu Keypad LockMode Button followed byRemote Start Info AlertCar Runtime AlertScreen Color Temp UnitButton Beep Sensor AdjustSystem Type Clock SetMenu Pair RemotePower Off Demo modeAlarm Features Normal Arm ProtectionSensor Silent Arm protection Sensor Warn-away Messages Full Silent Arm ProtectionFull Trigger Messages Emergency OverrideAlarm Report when disarming Trigger Zone Fault ReportNuisance Prevention NPC Alarm Report when requestedRemote Start Features Pit Stop ModeKey Takeover Remote Start Safe-lock Disabling Remote StartAdvanced Start Temperature Reporting Timer Start operationSmart Start operation Manual Transmission Start MTS mode Remote Start Time-out AlertStart the engine and the text and tones play as an alert Turbo Timer Mode Remote Start Error Passive Arming Remote and System OperationsAuto Re-arming Onetime BypassPower Save Valet ModeAutomatic Remote Updates Rapid ResumeFeature not Available Out of RangeNo Remote Output Way Way Companion Remote ControlAccessing Commands Using the 1 way companion remoteButton Auto Lock Car SelectProgramming Remote Features menuRemote control housing Battery Information 1-WayPolarity, replace the old battery Tray while gently prying the traySystem Expansion Options Auxiliary Channels Driver door priority unlockingLow Battery Battery Information Responder LCBattery Life Battery Disposal Document Terminology Control Module Glossary of TermsPatent Information Government Regulations Remote ControlsControl Center SafetyInstallation Remote Start CapableManual Transmission Vehicles Operation of the Remote Start Module if the Vehicle Starts Upgrades and Batteries InterferenceWater/Heat Resistance Limited lifetime consumer warranty Directed Electronics. All rights reserved