Clifford 570.4X manual Temperature Reporting, Timer Start operation, Smart Start operation

Page 39

Timer Start operation

Activation begins a countdown timer as set by the installer (de- fault 3 hours). When the timer expires the engine starts and the REMOTE START ON message is sent to the remote control. When the Remote start runtime expires the engine shuts off, the REMOTE START OFF message is sent to the remote control and the countdown timer restarts. This will repeat as many times as set by the installer (default 6 starts). Timer Start is exited after the ﬁnal start.

Smart Start operation

Smart Start uses the settings for Timer Start in addition to temperature and battery level to automatically start the engine. Activation begins the countdown timer. When the timer expires the vehicle interior tem- perature and battery level is checked and, if the Temperature is above 100F, below 0F, or the battery level is below 10.5v, the engine will start and the REMOTE START ON message will be sent to the remote controls. When the Remote start runtime expires the engine shuts off, the REMOTE START OFF message is sent to the remote control and the countdown timer restarts. Smart Start is exited after the ﬁnal start.

Note The temperature and battery thresholds can be changed by an authorized Directed dealer if a higher or lower threshold is desired.

Temperature Reporting

During Remote start the vehicle interior is checked regularly for tem- perature changes. If a change in temperature is detected this report will be sent to the remote for display. Each time the remote receives this report it will beep, update, and display the newest temperature information using the Temperature Gauge icon.

36	© 2011 Directed Electronics. All rights reserved.

Image 39

Contents Page Congratulations What you get Government Regulations and Safety information Your Warranty Replacement remote controlsImportant information Contents Page Page Getting Started Charging the remote controlKeys to using this manual Can be located through the table of contentsAt a Glance Function button Responder LC 2-WayAt a Control CenterTable below describes all the status screen icons Status Screen IconsRemote Start Zone Status Feature menus Using your System Commands and ConﬁrmationsPerforming Commands Fault Condition Alerts Responder LC Command tableDirected Electronics. All rights reserved Basic Commands Direct Access ArmDisarm Remote Start AUX/TrunkPress and release the button 1 time Advanced Commands LevelSilent Arm Silent DisarmPress and hold the button Runtime ResetIf set to display runtime Commands Temp RequestSensor Bypass Remote ValetPress and release the button 2 times Timer Start ﬁrm and the Remote start status icons update CommandsRuntime Remaining Sensor Silent Arm Car ﬁnderPress and release the button 3 times Smart Start Alarm ReportFull Silent Arm DefoggerPress and release the button 4 times Button operation Access menu itemsResponder LC Conﬁguration Navigating menus and optionsButton followed by Setup Remote menu Keypad LockMain Menu ModeRemote Start Info AlertTemp Unit Runtime AlertCar Screen ColorClock Set Sensor AdjustButton Beep System TypeMenu Pair RemotePower Off Demo modeAlarm Features Normal Arm ProtectionSensor Silent Arm protection Emergency Override Full Silent Arm ProtectionSensor Warn-away Messages Full Trigger MessagesAlarm Report when disarming Trigger Zone Fault ReportNuisance Prevention NPC Alarm Report when requestedRemote Start Features Pit Stop ModeKey Takeover Remote Start Safe-lock Disabling Remote StartAdvanced Start Temperature Reporting Timer Start operationSmart Start operation Manual Transmission Start MTS mode Remote Start Time-out AlertStart the engine and the text and tones play as an alert Turbo Timer Mode Remote Start Error Onetime Bypass Remote and System OperationsPassive Arming Auto Re-armingRapid Resume Valet ModePower Save Automatic Remote UpdatesFeature not Available Out of RangeNo Remote Output Way Way Companion Remote ControlCar Select Using the 1 way companion remoteAccessing Commands Button Auto LockProgramming Remote Features menuTray while gently prying the tray Battery Information 1-WayRemote control housing Polarity, replace the old batterySystem Expansion Options Auxiliary Channels Driver door priority unlockingLow Battery Battery Information Responder LCBattery Life Battery Disposal Document Terminology Control Module Glossary of TermsPatent Information Government Regulations Remote ControlsControl Center SafetyInstallation Remote Start CapableManual Transmission Vehicles Operation of the Remote Start Module if the Vehicle Starts Upgrades and Batteries InterferenceWater/Heat Resistance Limited lifetime consumer warranty Directed Electronics. All rights reserved