Carrier Access AB II manual Access Bank

Page 5

Welcome

i

Access Bank II

Welcome to Access Bank II T1 Voice Switch & Data Multiplexer from Carrier Access Corporation. Access Bank II connects your company’s telephony and data networks to outside public and private network DS1 services with up to 3.072 Mbps of synchronous bandwidth capacity.

The Access Bank II combines the functions of intelligent Channel Service Units (CSUs)/Data Ser- vice Units (DSUs), digital cross-connect (DCS), and digital voice switch into one product.

The Remote Monitor provides a convenient and user-friendly software interface for configuring, monitoring, and testing the performance of the Access Bank II. The Access Bank II Remote Monitor software interface connects to the Access Bank II through the RS-232 Management/Data Port on the front control panel. Once the Remote Monitor application is installed on an IBM-compatible PC, you can connect to the RS-232 Management port through a Hayes compatible modem or through a direct connection. The Remote Monitor application can also be used from a remote PC for dial-in/dial-out management over a separate PSTN (Public Switched Telephone Network) analog line.

Remote Monitor Software on PC

Remote Monitor Software on PC

modem

PSTN

modem

Access Bank II

Access Bank II

Image 5

Contents Access Bank Page Page Page Access Bank Access Bank II Snmp Access BankAccess Bank II Snmp Sdsl Access Bank II SdslPage Contents Data Port Setup System Requirements Getting StartedInstalling Remote Monitor Software InstallationSoftware Overview Creating a Shortcut on the DesktopRemote Monitor 560DQDJHPHQW&DEOH Connecting the PC Directly to the Access BankWR%0 Connecting a Modem to the Access Bank II for Remote AccessStarting Up Remote Monitor Pull-Down Menus Selecting the Current Product Setting Up Remote MonitorSetting Up Remote Management Click on Connect Now, or Connecting to the Access BankSetting Up Remote Monitor Help Reading and Sending Screens General Rules and Tips for Using the Remote MonitorPage Changing to a New Product Saving ConfigurationsScreen Flagging Miscellaneous Loading ConfigurationsFlagging Changed Screens System SetupSystem Setup Screens Names Screen Problem Reporting Screen Snmp Screen System Clock ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 SetupSystem Clock Source 2 T1 Hardware SetupT1 Definitions Line Build Out LBO V.35 Data Port Setup Data Port SetupSetting the CTS Control Option Setting the Synchronous Data Rate or Asynchronous Subrate RS-232 Data Port SetupRS-232 Data Port Setup Synchronous Data Rate Option Asynchronous Subrate Options Page Static Connections ConnectionsConnecting Individual Channels Channel Type Configuring Contiguous ChannelsChannel/Signal Type Screen Event Log Screen PerformanceMessage Event Log Screen 3 T1 History Retrieving Events from the Event LogClearing the Event Log Definitions Loss of Received T1 Signal Also called Loss of Carrier5 T1 History Last 24 Hours Severely Errored SecondsLoopback Configuration MaintenanceTesting TSI Bert Loopback Configuration Settings Internal Bert ConfigurationAnalog Ports Update Intervals Update IntervalFXS Lcfo LCF LEDs System LEDs Definition of V.35 Status LED last LED DIP SwitchesDIP Switches