Carrier Access AB II manual Internal Bert Configuration, Loopback Configuration Settings

Page 57

Testing

8.1.2 Internal BERT Configuration

The Internal Bert Configuration allows you to configure the BERT chip (if enabled) to generate spe- cific patterns and error rates. Normally, the error rate is left at None, but the BERT pattern can be transmitted with a known error rate to confirm other test equipment accuracy.

8.1.2.1Loopback Configuration Settings

Field	Input
Pattern	All Ones, All Zeros, Alternating I/0, 1 in 8, QRSS, 511, 2047, 215-1,
	220-1, 223-1,
Error Rate	None, 10-1- 10-7

You can change configurations at any time.

To update the BERT configuration:

Select configurations for patterns & error rate.

Click Update BERT Config.

8-3

Image 57

Contents Access Bank Page Page Page Access Bank Access Bank II Snmp Access BankAccess Bank II Snmp Sdsl Access Bank II SdslPage Contents Data Port Setup System Requirements Getting StartedInstalling Remote Monitor Software InstallationSoftware Overview Creating a Shortcut on the DesktopRemote Monitor 560DQDJHPHQW&DEOH Connecting the PC Directly to the Access BankWR%0 Connecting a Modem to the Access Bank II for Remote AccessStarting Up Remote Monitor Pull-Down Menus Selecting the Current Product Setting Up Remote MonitorSetting Up Remote Management Click on Connect Now, or Connecting to the Access BankSetting Up Remote Monitor Help Reading and Sending Screens General Rules and Tips for Using the Remote MonitorPage Saving Configurations Screen FlaggingChanging to a New Product Miscellaneous Loading ConfigurationsSystem Setup System Setup ScreensFlagging Changed Screens Names Screen Problem Reporting Screen Snmp Screen System Clock ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 SetupSystem Clock Source 2 T1 Hardware SetupT1 Definitions Line Build Out LBO V.35 Data Port Setup Data Port SetupSetting the CTS Control Option RS-232 Data Port Setup RS-232 Data Port SetupSetting the Synchronous Data Rate or Asynchronous Subrate Synchronous Data Rate Option Asynchronous Subrate Options Page Static Connections ConnectionsConnecting Individual Channels Channel Type Configuring Contiguous ChannelsChannel/Signal Type Screen Event Log Screen PerformanceMessage Event Log Screen Retrieving Events from the Event Log Clearing the Event Log3 T1 History Definitions Loss of Received T1 Signal Also called Loss of Carrier5 T1 History Last 24 Hours Severely Errored SecondsMaintenance TestingLoopback Configuration TSI Bert Loopback Configuration Settings Internal Bert ConfigurationAnalog Ports Update Intervals Update IntervalFXS Lcfo LCF LEDs System LEDs Definition of V.35 Status LED last LED DIP SwitchesDIP Switches