Carrier Access AB II manual Configuring System Group Information

Page 33

System Setup Screens

2.1.5.3 Configuring System Group Information

The values that can be configured are:

System Name

The system Name is a string of 1-123 characters that is the administrative assigned name for this managed node.

Location

This is a string of 1-123 characters that describes the physical location of this node.

Contact

This is a string of 1-123 characters that identifies the contact person for this managed node, together with infor- mation on how to contact this person.

2.1.5.4 Security

The SNMP agent supported by the Access Bank II includes authentication. An authentication assures a recipi- ent that a message is from the source it claims to be from.

Get Community

Every SNMP message from a management station to an agent includes a community string. This name func- tions as a password and the message is assumed to be authentic if the sender knows the password.

Set Community

In order to allow a Network Manager for SNMP to alter your local parameters. You must add a string here. By default, this read/write access is disabled. Adding a string enables this capability, and the network manager must know the keyword to perform sets.

Trap Community

When an extraordinary event occurs at the agent, the managed node usually sends a single, simple trap message to the Network Manager. Traps are asynchronous notifications that are predefined in the MIB and must be known to both the agent and the Network Manager.

2-7

Image 33

Contents Access Bank Page Page Page Access Bank Access Bank II Snmp Access BankAccess Bank II Snmp Sdsl Access Bank II SdslPage Contents Data Port Setup System Requirements Getting StartedInstalling Remote Monitor Software InstallationSoftware Overview Creating a Shortcut on the DesktopRemote Monitor 560DQDJHPHQW&DEOH Connecting the PC Directly to the Access BankWR%0 Connecting a Modem to the Access Bank II for Remote AccessStarting Up Remote Monitor Pull-Down Menus Selecting the Current Product Setting Up Remote MonitorSetting Up Remote Management Click on Connect Now, or Connecting to the Access BankSetting Up Remote Monitor Help Reading and Sending Screens General Rules and Tips for Using the Remote MonitorPage Saving Configurations Screen FlaggingChanging to a New Product Miscellaneous Loading ConfigurationsSystem Setup System Setup ScreensFlagging Changed Screens Names Screen Problem Reporting Screen Snmp Screen System Clock ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 SetupSystem Clock Source 2 T1 Hardware SetupT1 Definitions Line Build Out LBO V.35 Data Port Setup Data Port SetupSetting the CTS Control Option RS-232 Data Port Setup RS-232 Data Port SetupSetting the Synchronous Data Rate or Asynchronous Subrate Synchronous Data Rate Option Asynchronous Subrate Options Page Static Connections ConnectionsConnecting Individual Channels Channel Type Configuring Contiguous ChannelsChannel/Signal Type Screen Event Log Screen PerformanceMessage Event Log Screen Retrieving Events from the Event Log Clearing the Event Log3 T1 History Definitions Loss of Received T1 Signal Also called Loss of Carrier5 T1 History Last 24 Hours Severely Errored SecondsMaintenance TestingLoopback Configuration TSI Bert Loopback Configuration Settings Internal Bert ConfigurationAnalog Ports Update Intervals Update IntervalFXS Lcfo LCF LEDs System LEDs Definition of V.35 Status LED last LED DIP SwitchesDIP Switches