Carrier Access AB II manual Connecting to the Access Bank, Click on Connect Now, or

Page 20

The baud rate must be set to match the baud rate of the Access Bank II. The factory default is 9600.

3.DO NOT change any settings in the Access Bank II Port Settings window. These settings are used only when you are using a modem connection.

1.7.2 Connecting to the Access Bank II

Use the Connection menu to connect to the Access Bank II, and later to perform operations associated with communications between the Remote Monitor software and the Access Bank II.

1.Attempt to establish a connection.

1.Pull down the Connection menu and click on Connect, or

2.Click on Connect Now, or

3.Click on the connect icon on the toolbar.

Note: If the remote management settings were not made correctly, the connection will not succeed, and a message will appear telling you to check the serial port and baud rate settings.

1-10

Image 20

Contents Access Bank Page Page Page Access Bank Access Bank Access Bank II SnmpAccess Bank II Sdsl Access Bank II Snmp SdslPage Contents Data Port Setup Getting Started System RequirementsSoftware Installation Installing Remote MonitorSoftware Overview Creating a Shortcut on the DesktopRemote Monitor Connecting the PC Directly to the Access Bank 560DQDJHPHQW&DEOHConnecting a Modem to the Access Bank II for Remote Access WR%0Starting Up Remote Monitor Pull-Down Menus Setting Up Remote Monitor Selecting the Current ProductSetting Up Remote Management Connecting to the Access Bank Click on Connect Now, orSetting Up Remote Monitor Help General Rules and Tips for Using the Remote Monitor Reading and Sending ScreensPage Changing to a New Product Saving ConfigurationsScreen Flagging Loading Configurations MiscellaneousFlagging Changed Screens System SetupSystem Setup Screens Names Screen Problem Reporting Screen System Clock Screen Snmp ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 Setup2 T1 Hardware Setup System Clock SourceT1 Definitions Line Build Out LBO Data Port Setup V.35 Data Port SetupSetting the CTS Control Option Setting the Synchronous Data Rate or Asynchronous Subrate RS-232 Data Port SetupRS-232 Data Port Setup Synchronous Data Rate Option Asynchronous Subrate Options Page Connections Static ConnectionsConnecting Individual Channels Configuring Contiguous Channels Channel TypeChannel/Signal Type Screen Performance Event Log ScreenMessage Event Log Screen 3 T1 History Retrieving Events from the Event LogClearing the Event Log Loss of Received T1 Signal Also called Loss of Carrier DefinitionsSeverely Errored Seconds 5 T1 History Last 24 HoursLoopback Configuration MaintenanceTesting TSI Bert Internal Bert Configuration Loopback Configuration SettingsAnalog Ports Update Interval Update IntervalsFXS Lcfo LCF LEDs System LEDs DIP Switches Definition of V.35 Status LED last LEDDIP Switches