Carrier Access AB II manual Access Bank II Sdsl, Access Bank II Snmp Sdsl

Page 7

Welcome

iii

 

 

0.0.3 Access Bank II SDSL

The Access Bank II SDSL provides T1 voice and data multiplexing, and is equipped with integrated Channel Service Unit (CSU) and Data Service Unit (DSU). It supplies up to 1.536 Mbps of synchronous bandwidth capacity for connecting customer premises telecommunications equipment to public and private network DS1 services. In the place of the second T1, the Access Bank II SDSL provides an SDSL port. Some of the benefits of using SDSL are as follows:

Because SDSL connections are digital from end to end, the data transfer rates are optimized.

SDSL connections use standard copper phone wires for connections to routers and other data applications.

0.0.4Access Bank II SNMP SDSL

The Access Bank II SNMP SDSL offers all of the features of the Access Bank II, with the following additional features:

An embedded Simple Network Management Protocol (SNMP) agent supporting MIB-II and standard MIBS for T1 and V.35 via TCP/IP over a 10base-T Ethernet connection.

A Command Line Interface (CLI) for local or remote management via RS-232 or telnet connections.

Because SDSL connections are digital from end to end, the data transfer rates are optimized.

SDSL connections use standard copper phone wires.

Image 7
Contents Access Bank Page Page Page Access Bank Access Bank II Snmp Access BankAccess Bank II Snmp Sdsl Access Bank II SdslPage Contents Data Port Setup System Requirements Getting StartedCreating a Shortcut on the Desktop Software InstallationInstalling Remote Monitor Software OverviewRemote Monitor 560DQDJHPHQW&DEOH Connecting the PC Directly to the Access BankWR%0 Connecting a Modem to the Access Bank II for Remote AccessStarting Up Remote Monitor Pull-Down Menus Selecting the Current Product Setting Up Remote MonitorSetting Up Remote Management Click on Connect Now, or Connecting to the Access BankSetting Up Remote Monitor Help Reading and Sending Screens General Rules and Tips for Using the Remote MonitorPage Screen Flagging Saving ConfigurationsChanging to a New Product Miscellaneous Loading ConfigurationsSystem Setup Screens System SetupFlagging Changed Screens Names Screen Problem Reporting Screen Snmp Screen System Clock ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 SetupSystem Clock Source 2 T1 Hardware SetupT1 Definitions Line Build Out LBO V.35 Data Port Setup Data Port SetupSetting the CTS Control Option RS-232 Data Port Setup RS-232 Data Port SetupSetting the Synchronous Data Rate or Asynchronous Subrate Synchronous Data Rate Option Asynchronous Subrate Options Page Static Connections ConnectionsConnecting Individual Channels Channel Type Configuring Contiguous ChannelsChannel/Signal Type Screen Event Log Screen PerformanceMessage Event Log Screen Clearing the Event Log Retrieving Events from the Event Log3 T1 History Definitions Loss of Received T1 Signal Also called Loss of Carrier5 T1 History Last 24 Hours Severely Errored SecondsTesting MaintenanceLoopback Configuration TSI Bert Loopback Configuration Settings Internal Bert ConfigurationAnalog Ports Update Intervals Update IntervalFXS Lcfo LCF LEDs System LEDs Definition of V.35 Status LED last LED DIP SwitchesDIP Switches