Carrier Access AB II manual Line Build Out LBO

Page 38

3.2.6 Line Build Out (LBO):

CSU 0 db/DSX (0’-133’), CSU -7.5 dB, CSU -15 dB, CSU -22 dB, DSX (133’-266’), DXS (266’-399’), DSX (399’ - 533’), DSX (533’-655’)

Selects the signal level to be transmitted from the Access Bank II to the T1 line(s). The default is 0 dB/DSX (0’-133’), which is the normal signal level required by most public car- riers. It is important to remember that this setting can only be changed in the Remote mode. A T1 signal level too high for the engineered facility can result in Bipolar Violations (BPV). Too low a level can result in signal loss (LOS). Verify in advance the proper signal level required by your service provider.

3-4

Image 38

Contents Access Bank Page Page Page Access Bank Access Bank Access Bank II SnmpAccess Bank II Sdsl Access Bank II Snmp SdslPage Contents Data Port Setup Getting Started System RequirementsSoftware Overview Software InstallationInstalling Remote Monitor Creating a Shortcut on the DesktopRemote Monitor Connecting the PC Directly to the Access Bank 560DQDJHPHQW&DEOHConnecting a Modem to the Access Bank II for Remote Access WR%0Starting Up Remote Monitor Pull-Down Menus Setting Up Remote Monitor Selecting the Current ProductSetting Up Remote Management Connecting to the Access Bank Click on Connect Now, orSetting Up Remote Monitor Help General Rules and Tips for Using the Remote Monitor Reading and Sending ScreensPage Changing to a New Product Saving ConfigurationsScreen Flagging Loading Configurations MiscellaneousFlagging Changed Screens System SetupSystem Setup Screens Names Screen Problem Reporting Screen System Clock Screen Snmp ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 Setup2 T1 Hardware Setup System Clock SourceT1 Definitions Line Build Out LBO Data Port Setup V.35 Data Port SetupSetting the CTS Control Option Setting the Synchronous Data Rate or Asynchronous Subrate RS-232 Data Port SetupRS-232 Data Port Setup Synchronous Data Rate Option Asynchronous Subrate Options Page Connections Static ConnectionsConnecting Individual Channels Configuring Contiguous Channels Channel TypeChannel/Signal Type Screen Performance Event Log ScreenMessage Event Log Screen 3 T1 History Retrieving Events from the Event LogClearing the Event Log Loss of Received T1 Signal Also called Loss of Carrier DefinitionsSeverely Errored Seconds 5 T1 History Last 24 HoursLoopback Configuration MaintenanceTesting TSI Bert Internal Bert Configuration Loopback Configuration SettingsAnalog Ports Update Interval Update IntervalsFXS Lcfo LCF LEDs System LEDs DIP Switches Definition of V.35 Status LED last LEDDIP Switches