Carrier Access AB II manual Setting Up Remote Management

Page 19

Setting Up Remote Monitor

A dialog box appears, asking if you want to save this configuration.

3. Select the Yes button to save your configuration.

1.7.1 Setting Up Remote Management

The next thing you must do is set up remote management for your Access Bank II on the Remote Management screen. You cannot connect the remote management PC to the Access Bank II until this is done. The Remote Management screen should still be displayed.

You can set up for either direct connection or modem connection on the Local Comm Settings window of this screen. The following procedure is for direct connection only.

1.Select Direct Connection from the Connect Via ... section of the Remote Management screen.

2.Select the comm port and baud rate in the Local Comm Settings section of the Remote Man- agement screen.

1-9

Image 19

Contents Access Bank Page Page Page Access Bank Access Bank II Snmp Access BankAccess Bank II Snmp Sdsl Access Bank II SdslPage Contents Data Port Setup System Requirements Getting StartedCreating a Shortcut on the Desktop Software InstallationInstalling Remote Monitor Software OverviewRemote Monitor 560DQDJHPHQW&DEOH Connecting the PC Directly to the Access BankWR%0 Connecting a Modem to the Access Bank II for Remote AccessStarting Up Remote Monitor Pull-Down Menus Selecting the Current Product Setting Up Remote MonitorSetting Up Remote Management Click on Connect Now, or Connecting to the Access BankSetting Up Remote Monitor Help Reading and Sending Screens General Rules and Tips for Using the Remote MonitorPage Screen Flagging Saving ConfigurationsChanging to a New Product Miscellaneous Loading ConfigurationsSystem Setup Screens System SetupFlagging Changed Screens Names Screen Problem Reporting Screen Snmp Screen System Clock ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 SetupSystem Clock Source 2 T1 Hardware SetupT1 Definitions Line Build Out LBO V.35 Data Port Setup Data Port SetupSetting the CTS Control Option RS-232 Data Port Setup RS-232 Data Port SetupSetting the Synchronous Data Rate or Asynchronous Subrate Synchronous Data Rate Option Asynchronous Subrate Options Page Static Connections ConnectionsConnecting Individual Channels Channel Type Configuring Contiguous ChannelsChannel/Signal Type Screen Event Log Screen PerformanceMessage Event Log Screen Clearing the Event Log Retrieving Events from the Event Log3 T1 History Definitions Loss of Received T1 Signal Also called Loss of Carrier5 T1 History Last 24 Hours Severely Errored SecondsTesting MaintenanceLoopback Configuration TSI Bert Loopback Configuration Settings Internal Bert ConfigurationAnalog Ports Update Intervals Update IntervalFXS Lcfo LCF LEDs System LEDs Definition of V.35 Status LED last LED DIP SwitchesDIP Switches