Carrier Access AB II manual Message

Page 50

Events:

Message

Power Up

Remote Monitor Login/ logout

Local/Remote switch change

Soft Reset

Low Power and/or Brown-Out conditions

Alarm Events

Loss of Signal; Signal Restored

Received Loop Up/

Received Loop Down

Code

Received Unframed 1’s; Stopped receiving Unframed 1’s

Loss of Framing; Fram- ing restored

received Yellow Alarm; Yellow Alarm not being received

Explanation

This is an informational message that logs the time and date that the stytem was powered up.

This is an informational message that logs the time and date that users logged into and off the Remote Monitor software.

This is an informational message that logs when the Local/ Remote switch on the Access Bank II was changed.

This is an informational message that indicates that the sys- tem has detected a soft reset

This is an alarm message logging information about condi- tions in which the power dips below standard levels. Note that when power is cycled off and then on again, the Access Bank II logs a brownout event. This is a normal part of operation, and you can ignore these messages.

The Loss of Signal alarm indicates that the Access Bank II has stopped receiving the T1 signal. The Signal Restored message indicates that the signal has been restored follow- ing a Loss of Signal alarm.

The Received Loop Up Code message indicates that the Access Bank II has received an in-band remote loop-up code. The Received Loop Down Code message indicates that the Access Bank II has received an in-band remote loop-down code.

The Received Unframed 1s message indicates that the Access Bank II has received unframed ones, and the Stopped Receiving Unframed 1s message indicates that the system is no longer receiving unframed ones following a Received Unframed 1s message.

The Loss of Framing message indicates that the system received unframed data (all ones). The Framing Restored message indicates that Framing has been restored following a Loss of Framing error.

The Received Yellow Alarm message indicates that the sys- tem is receiving yellow alarms. The Yellow Alarm Not Being Received message indicates that the yellow alarm is no longer being received.

7-2

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Access Bank Page Page Page Access Bank Access Bank Access Bank II SnmpAccess Bank II Sdsl Access Bank II Snmp SdslPage Contents Data Port Setup Getting Started System RequirementsSoftware Overview Software InstallationInstalling Remote Monitor Creating a Shortcut on the DesktopRemote Monitor Connecting the PC Directly to the Access Bank 560DQDJHPHQW&DEOHConnecting a Modem to the Access Bank II for Remote Access WR%0Starting Up Remote Monitor Pull-Down Menus Setting Up Remote Monitor Selecting the Current ProductSetting Up Remote Management Connecting to the Access Bank Click on Connect Now, orSetting Up Remote Monitor Help General Rules and Tips for Using the Remote Monitor Reading and Sending ScreensPage Changing to a New Product Saving ConfigurationsScreen Flagging Loading Configurations MiscellaneousFlagging Changed Screens System SetupSystem Setup Screens Names Screen Problem Reporting Screen System Clock Screen Snmp ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 Setup2 T1 Hardware Setup System Clock SourceT1 Definitions Line Build Out LBO Data Port Setup V.35 Data Port SetupSetting the CTS Control Option Setting the Synchronous Data Rate or Asynchronous Subrate RS-232 Data Port SetupRS-232 Data Port Setup Synchronous Data Rate Option Asynchronous Subrate Options Page Connections Static ConnectionsConnecting Individual Channels Configuring Contiguous Channels Channel TypeChannel/Signal Type Screen Performance Event Log ScreenMessage Event Log Screen 3 T1 History Retrieving Events from the Event LogClearing the Event Log Loss of Received T1 Signal Also called Loss of Carrier DefinitionsSeverely Errored Seconds 5 T1 History Last 24 HoursLoopback Configuration MaintenanceTesting TSI Bert Internal Bert Configuration Loopback Configuration SettingsAnalog Ports Update Interval Update IntervalsFXS Lcfo LCF LEDs System LEDs DIP Switches Definition of V.35 Status LED last LEDDIP Switches
Top Page Image Contents