Carrier Access AB II manual Setting the CTS Control Option

Page 40

4.1.6 Setting the CTS Control Option

CTS Control can be set to force CTS high, force CTS low, follow RTS, or follow CD. Force CTS high is the correct setting for normal operation. Set as required by data equipment connected to the Access Bank II.

4-2

Image 40

Contents Access Bank Page Page Page Access Bank Access Bank Access Bank II SnmpAccess Bank II Sdsl Access Bank II Snmp SdslPage Contents Data Port Setup Getting Started System RequirementsSoftware Installation Installing Remote MonitorSoftware Overview Creating a Shortcut on the DesktopRemote Monitor Connecting the PC Directly to the Access Bank 560DQDJHPHQW&DEOHConnecting a Modem to the Access Bank II for Remote Access WR%0Starting Up Remote Monitor Pull-Down Menus Setting Up Remote Monitor Selecting the Current ProductSetting Up Remote Management Connecting to the Access Bank Click on Connect Now, orSetting Up Remote Monitor Help General Rules and Tips for Using the Remote Monitor Reading and Sending ScreensPage Screen Flagging Saving ConfigurationsChanging to a New Product Loading Configurations MiscellaneousSystem Setup Screens System SetupFlagging Changed Screens Names Screen Problem Reporting Screen System Clock Screen Snmp ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 Setup2 T1 Hardware Setup System Clock SourceT1 Definitions Line Build Out LBO Data Port Setup V.35 Data Port SetupSetting the CTS Control Option RS-232 Data Port Setup RS-232 Data Port SetupSetting the Synchronous Data Rate or Asynchronous Subrate Synchronous Data Rate Option Asynchronous Subrate Options Page Connections Static ConnectionsConnecting Individual Channels Configuring Contiguous Channels Channel TypeChannel/Signal Type Screen Performance Event Log ScreenMessage Event Log Screen Clearing the Event Log Retrieving Events from the Event Log3 T1 History Loss of Received T1 Signal Also called Loss of Carrier DefinitionsSeverely Errored Seconds 5 T1 History Last 24 HoursTesting MaintenanceLoopback Configuration TSI Bert Internal Bert Configuration Loopback Configuration SettingsAnalog Ports Update Interval Update IntervalsFXS Lcfo LCF LEDs System LEDs DIP Switches Definition of V.35 Status LED last LEDDIP Switches