Carrier Access AB II manual Pull-Down Menus

Page 17

Pull-Down Menus

Now that you have successfully loaded and launched the Remote Monitor, you must set it up to work with your Access Bank II. The setup process should proceed in the following order:

1.Select the correct product.

2.Set up Remote Management.

3.Connect the Remote Monitor to the Access Bank II.

4.Set up all screens for correct operation.

5.Send all screens to the Access Bank II.

1.6Pull-Down Menus

The Access Bank II application contains three pull-down menus—File, Connection, and Help. The File pull-down menu allows you to select the specific CAC product you are using, and manage specific configuration files. The Connection pull-down menu contains operations associated with communications to the Access Bank II. The Help pull-down menu allows you to access online help for the active screen.

1-7

Image 17

Contents Access Bank Page Page Page Access Bank Access Bank II Snmp Access BankAccess Bank II Snmp Sdsl Access Bank II SdslPage Contents Data Port Setup System Requirements Getting StartedInstalling Remote Monitor Software InstallationSoftware Overview Creating a Shortcut on the DesktopRemote Monitor 560DQDJHPHQW&DEOH Connecting the PC Directly to the Access BankWR%0 Connecting a Modem to the Access Bank II for Remote AccessStarting Up Remote Monitor Pull-Down Menus Selecting the Current Product Setting Up Remote MonitorSetting Up Remote Management Click on Connect Now, or Connecting to the Access BankSetting Up Remote Monitor Help Reading and Sending Screens General Rules and Tips for Using the Remote MonitorPage Changing to a New Product Saving ConfigurationsScreen Flagging Miscellaneous Loading ConfigurationsFlagging Changed Screens System SetupSystem Setup Screens Names Screen Problem Reporting Screen Snmp Screen System Clock ScreenConfiguring Network Parameters ColdStart Trap and warmStart Trap Configuring System Group Information Page T1 Setup T1 SetupSystem Clock Source 2 T1 Hardware SetupT1 Definitions Line Build Out LBO V.35 Data Port Setup Data Port SetupSetting the CTS Control Option Setting the Synchronous Data Rate or Asynchronous Subrate RS-232 Data Port SetupRS-232 Data Port Setup Synchronous Data Rate Option Asynchronous Subrate Options Page Static Connections ConnectionsConnecting Individual Channels Channel Type Configuring Contiguous ChannelsChannel/Signal Type Screen Event Log Screen PerformanceMessage Event Log Screen 3 T1 History Retrieving Events from the Event LogClearing the Event Log Definitions Loss of Received T1 Signal Also called Loss of Carrier5 T1 History Last 24 Hours Severely Errored SecondsLoopback Configuration MaintenanceTesting TSI Bert Loopback Configuration Settings Internal Bert ConfigurationAnalog Ports Update Intervals Update IntervalFXS Lcfo LCF LEDs System LEDs Definition of V.35 Status LED last LED DIP SwitchesDIP Switches