Table 3.2 B. Compatible
Manufacturer | Model | Capacity | Rotation | |
Seagate | ST340810A | 40G | 5400 RPM | |
ST380020A | 80G | 5400 RPM | ||
| ||||
| ST320014A | 20G | 5400 RPM | |
| ST340015A | 40G | 5400 RPM | |
| ST380012ACE | 80G | 5400 RPM | |
| ST3120025ACE | 120G | 5400 RPM | |
| ST340014A | 40G | 7200 RPM | |
| ST380011A | 80G | 7200 RPM | |
| ST380013A | 80G | 7200 RPM | |
| ST3120026A | 120G | 7200 RPM | |
| ST3160023A | 160G | 7200 RPM | |
| ST3200822A | 200G | 7200 RPM | |
| ST3250823A | 250G | 7200 RPM | |
| ST3400832A | 400G | 7200 RPM | |
Maxtor | 160G | 5400 RPM | ||
80G | 5400 RPM | |||
| ||||
| 300G | 5400 RPM | ||
| 6Y080L0 | 80G | 7200 RPM | |
| 80G | 7200 RPM | ||
| 120G | 7200 RPM | ||
| 200G | 7200 RPM | ||
| 250G | 7200 RPM | ||
| 6B300R0 | 300G | 7200 RPM | |
| 6L080P0 (RoHS) | 80G | 7200 RPM | |
| 6L100P0 (RoHS) | 100G | 7200 RPM | |
| 6L120P0 (RoHS) | 120G | 7200 RPM | |
| 6L160P0 (RoHS) | 160G | 7200 RPM | |
| 6L200P0 (RoHS) | 200G | 7200 RPM | |
| 6L250R0 (RoHS) | 250G | 7200 RPM | |
| 6L300R0 (RoHS) | 300G | 7200 RPM | |
Western Digital | WD800AB | 80G | 5400 RPM | |
WD1200AB | 120G | 5400 RPM | ||
| ||||
| WD800BB | 80G | 7200 RPM | |
| WD1200BB | 120G | 7200 RPM | |
| WD1800BB | 180G | 7200 RPM | |
| WD2000BB | 200G | 7200 RPM | |
| WD2500JB | 250G | 7200 RPM | |
Samsung | SV0802N | 80G | 5400 RPM | |
SV1203N | 120G | 5400 RPM | ||
|
NOTE:
2.3 System Information
You can display system settings information as shown on Table 3.3 A below at any time by pressing the Display button 8 . In the playback mode, the recorded video information is displayed. In the live or recording mode, the Manual Recording information is displayed. However, when the DVR is displaying a decoded image from a multiplexer, you must first switch the unit to encoded image displaying (the pictures is switching swiftly and the light of the Monitor button 16 is off) by pressing the Monitor button 16 . Each
sequential press of the Display button 8 displays a different message detailed in the following example. By default, the unit displays the time, date, and an indicating bar of capacity status on a monitor as shown.
Default Display
( Capacity Used ) ( Capacity Remaining )
09- 05-2003 16:13:02
(Date) (Time)
12