NOTE: Clock data is retained for about 3 months after the
DAYLIGHT SAVING:
This entry allows users to set the daylight saving time.
OFF: Disables the daylight saving time.
USA: Daylight saving time begins at 2:00 a.m. on the first Sunday of April. Time reverts to standard time at 2:00 a.m. on the last Sunday of October.
EUROPE ( Except UK ): Daylight saving time begins at 2:00 a.m. on the last Sunday of March. Time reverts to standard time at 2:00 a.m. on the last Sunday of October.
UK: Daylight saving time begins at 1:00 a.m. on the last Sunday of March. Time reverts to standard time at 1:00 a.m. on the last Sunday of October.
SET: to set the start and ending for the daylight saving time.
REC ENABLE:
This option enables/disables the programmed scheduled recording.
ON: Enables the scheduled recording.
OFF: Disables the scheduled recording.
TIMER:
This entry allows users to program the time each day when the DVR will start and stop recording. There are 2 time periods each day available for scheduling. The time is displayed in a
REC SCHEDULE
START END START END
S00:00- 00:00 00:00- 00:00
M00:00- 00:00 00:00- 00:00 T 00:00- 00:00 00:00- 00:00 W 00:00- 00:00 00:00- 00:00
T 00:00- 00:00 00:00- 00:00
F00:00- 00:00 00:00- 00:00 S 00:00- 00:00 00:00- 00:00
OK CANCEL
TO MOVE TO CHANGE
4.4 COMMUNICATION Setting
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
This option allows you to configure the statuses of the
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING |
|
COMM ID | :01 |
RS232 | :ON |
RS485 | :ON |
BAUD | :2400 |
NET ENABLE | :OFF |
NET DHCP | :OFF |
NET IP | :SET |
NET ACCOUNT | :SET |
FTP SETTING |
|
MAIN PAGE |
|
|
|
35