4.MENU SETUP
4.MENU SETUP
There are 6 categories for operation setting in the setup menu system as shown below. The following sections will instruct you step by step to configure the operation setting and state each menu’s purpose and options. Press the Setup button 9 to access the setup menu. Once inside the menu system, the
KEY FUNCTIONS
Setup button 9 :
Press to enter the setup menu. Press again to exit the setup mode.
“^” 12 and “v” 13 buttons :
Press to select the desired item or entry for setting.
“<” 11 and “>” 14 buttons :
Press to highlight the desired option or to select the context for setting.
Enter 15 button :
Press to enter the selected item and to save the setting.
Shuttle Ring 20 :
Turn to highlight the desired option or to select the context for setting.
Jog Dial 21 :
Turn to select the desired item or entry for setting.
4.1 REC Setting
MAIN MENU
RECORD
ALARM/ MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO REC PAGE
This page allows you to set the recording rate and recording quality, and enables you to continue recording when the disk is full.
MAIN MENU
RECORD
ALARM/ MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO REC PAGE
REC SETTING
AUTO START REC | :OFF |
REC RATE | :30 F/S |
REC QUALITY | :BEST |
DISK FULL | :REWRITE |
AUDIO | :OFF |
MULTIPLEXER | :ON |
TEXT INSERTION |
|
MAIN PAGE |
|
AUTO START REC:
This option determines the way to record automatically after power activated if necessary.
OFF: Disables it.
ON: Enables it.
REC RATE :
This option is for adjusting the number of pictures recorded every second into a storage disk. The recording rate controls the frequency at which the number of video pictures can be recorded.
zFor an NTSC unit there are 11 different recording rates you can select from: 60F/S (60 fields per second), 30F/S, 20F/S, 12F/S,
31