Maxtor MV-DR3000 Comm ID, Baud, NET Enable, NET Dhcp, Net Ip, NET Account, FTP Setting

IP:

MASK:

GATEWAY:

HTTP PORT:

COMM ID:

Communication ID for the RS232 and RS485 communication ports. After the DVR receives a RS232 or RS485 command, it checks if the <Dest ID> within the code is the same as the COMM ID, in which case the particular command can be accepted.

RS-232:

The RS-232 communication port can be either in an importing or exporting mode according to your applications.

ON: Enables the RS-232 communication port. When you wish the unit to be controlled by an external device, please select this entry for use.

OFF: Disables the RS-232 communication port.

RS-485:

The RS-485 communication port can be either in an importing or exporting mode according to your applications.

ON: Enables the RS-485 communication port. When you wish the unit to be controlled by an external device, please select this entry for use.

OFF: Disables the RS-485 communication port.

BAUD:

You have the option of using a Baud rate ( at

8different levels : 2400, 4800, 9600, 19200, 28800, 38400, 57600 or 115200).

NET ENABLE:

This option enables or disables the Ethernet communication port.

OFF:Disables it.

ON: Enables it.

36

NET DHCP:

This option enables or disables the Ethernet communication port.

OFF:Disables it.

ON: Enables it.

NOTE: If provided with a DHCP server, the DVR

can get an IP automatically by setting this option

to ON.

NET IP:

This option is used to configure the Ethernet communication settings. This is required for the purpose of making a network connection. Please consult with a qualified MIS professional to configure it.

XXX.XXX.XXX.XXX

XXX.XXX.XXX.XXX

XXX.XXX.XXX.XXX

XXXX

NET ACCOUNT:

COMM SETTING
COMM ID	:01
RS232	:ON
RS485	:ON
BAUD	:2400
NET ENABLE	:OFF
NET DHCP	:OFF
NET IP	:SET
NET ACCOUNT	:SET
FTP SETTING
MAIN PAGE

NET ACCOUNT

USERNAME	PASSWORD
ADMIN [admin	] [9999]
VIEW [view	] [0000]

SET NET ACCOUNT

FTP SETTING:

This entry allows users to set the FTP File Transfer Protocol.