Recording Operations, Ring and the Jog Dial

3.2 Recording Operations

This section details the way to record video into hard-disk drives. Before commencing with the recording function, please configure the recording setting properly according to your needs.

3.2.1 Manual Recording

Take the following steps to start and stop recording:

(1)Press the REC button 6 to record video into a hard-disk drive with the corresponding programmed recording settings. The REC

button 6 will light up indicating the DVR is in the recording status.

(2)Press the REC button 6 for 3 seconds to stop recording any time.

(3)To access just recorded video, please refer to section 3.4 for more details.

3.2.2 Timer Recording

Timer recording provides 2 periods of time each day in a weekly table which programs the DVR to turn on and off at specified times. This way the DVR will start/ stop recording according to the programmed schedule.

(2) Select the CLOCK / TIMER and press the Enter button 15 to enter the CLOCK / TIMER page.

(3)Select the TIMER－SET.

(4)Press the Enter button 15 to enter the REC SCHEDULE table.

(5)You can set up by using the “<” button 11 and the “>” button 14 to locate the specific day/hour/minute and use the “^” button 12

and the “v” button 13 to set the day/hour/minute you wish.

You can also set up by using the Shuttle

Ring and the Jog Dial.					is the equal of
the “<” button 11 ,				is the equal of the
“>” button		14 ,	is	the equal of the “^”
button	12	and	is	the	equal of the “v”
button	13 .

The time is displayed in a 24-hour clock format.

(6)After scheduling is completed, press the Enter button 15 and set OK to save the setting or select CANCEL to leave the page without saving.

(7)To activate/ deactivate the programmed recording schedule, set the REC ENABLE to ON/ OFF. If the scheduled recording is on,

MAIN MENU

RECORD ALARM / MOTION CLOCK/ TIMER COMMUNICATION DISK

SYSTEM

GOTO CLOCK/ TIMER PAGE

	CLOCK/TIMER
CLOCK		:SET
	DAYLIGHT SAVING	:OFF
	REC ENABLE	:OFF
	TIMER	:SET
	TITLE	:SET
	MAIN PAGE

the red indicator of the Timer Record 17 will be on as well.

MAIN MENU

RECORD

ALARM / MOTION

CLOCK/ TIMER

COMMUNICATION

DISK

SYSTEM

GOTO CLOCK/ TIMER PAGE

REC SCHEDULE

START END START END

S00:00- 00:00 00:00- 00:00

M00:00- 00:00 00:00- 00:00

T00:00- 00:00 00:00- 00:00

W00:00- 00:00 00:00- 00:00

T 00:00- 00:00 00:00- 00:00

F00:00- 00:00 00:00- 00:00 S 00:00- 00:00 00:00- 00:00

OK CANCEL

TO MOVE TO CHANGE

(1) Press the Setup button 9 to enter the

MAIN MENU.

	CLOCK/TIMER
CLOCK		:SET
	DAYLIGHT SAVING	:OFF
	REC ENABLE	:OFF
	TIMER	:SET
	TITLE	:SET
	MAIN PAGE

(8) Press the REC button 6 for 3 seconds