Maxtor MV-DR3000 operation manual Clock / Timer Setting

NOTE: If the device is already under recording mode before an alarm occur, the pre-alarm recording will not take effect.

MOTION SETTING:

The motion detection function is convenient for people without an alarm trigger input, but it can also used be with an alarm trigger input. If this function is enabled, object’s movement will trigger the alarm recording just like the outside trigger signal. Before using the motion detection function, please turn the ENABLE option to ON, and set the SENSITIVITY (1 ~ 5) to a suitable value.

NOTE: The MOTION ENABLE option is not allowed set to ON when MULTIPLEXER option is set to ON in the RECORD page, it is because the motion detection function is for single camera only.

MOTION SETTING

MOTION ENABLE	: ON
SENSITIVITY	: 3
REGION	: SET

MAIN PAGE

SET MOTION REGION

( 30 , 40 ) - ( 99 , 99 )

MOTION ENABLE:

This option enables / disables the motion detection.

ON: Enables the motion detection.

OFF: Disables the motion detection.

SENSITIVITY:

This option allows users to set the motion sensitivity. 1 is the most sensitive setting. 5 is the least sensitive setting.

REGION:

This option allows users to set the motion region.

4.3 CLOCK / TIMER Setting

MAIN MENU

RECORD

ALARM / MOTION

CLOCK/ TIMER

COMMUNICATION

DISK

SYSTEM

GOTO CLOCK/ TIMER PAGE

The DVR provides a weekly table consisting of two periods of time each day for scheduled recording. This option allows you to set the time each day when the DVR will start and stop recording.

MAIN MENU

RECORD

ALARM / MOTION

CLOCK/ TIMER

COMMUNICATION

DISK

SYSTEM

GOTO CLOCK/ TIMER PAGE

	CLOCK/TIMER
CLOCK		:SET
	DAYLIGHT SAVING	:OFF
	REC ENABLE	:OFF
	TIMER	:SET
	TITLE	:SET
	MAIN PAGE

CLOCK:

This entry allows users to set the system time.

34